Later today I will search for my build sheet on my 1970 GT500 that I am selling. Since it is a low mileage car with all original interior and never wrecked I should be able to find it. Besides under the drivers seat carpet area where else should I look for it?? Should I pull up the rear seat? Thanks in advance for any suggestions..
Under the front driver seat area...
I've found 10-11 there
For your make and year check under all of the carpet underlayment, back side of the both door panels and since you have the seats out check between the burlap and springs on the seats for good measure
If its really stained I got a method for cleaning that you'll see out there or can aim you to an article that will improve them allot in most cases
I found mine 1969 GT 500 3rd owner, underside of the carpet underlayment.
Pete
This is a Dearborn '68 - found one under the trunk mat on the gas tank and two others under the insulation on the floor along with three inspection sheets.
Bottom line the build sheet could be anywhere or nowhere.
I found it last night!! Under the carpet underlayment under the rear seat on drivers side...I also pulled the drivers seat since I've read that some cars had more than one...nothing under the drivers seat...should I check under the pass. front seat area? thanks for the replies. A few pics attached.
Quote from: J_Speegle on July 27, 2022, 01:57:03 PM
For your make and year check under all of the carpet underlayment, back side of the both door panels and since you have the seats out check between the burlap and springs on the seats for good measure
If its really stained I got a method for cleaning that you'll see out there or can aim you to an article that will improve them allot in most cases
Jeff, yes I am interested...thanks
Quote from: RPMRon on July 28, 2022, 03:18:24 PM
Jeff, yes I am interested...thanks
Here you go
(https://www.concoursmustang.com/forum/gallery/17/6-280722165640-17761698.jpeg)
https://www.docdroid.net/q9Thki7/cmf-buildsheet-cleaning-open-source2-pdf (https://www.docdroid.net/q9Thki7/cmf-buildsheet-cleaning-open-source2-pdf)
Great that you found it. I had to have Marti make one for my car.