Messages

I have a good used original latch.  $35 plus mailing.
Kurt

Also noted on the VA. mustang latch, the spring is visible.  Not visible on originals I've seen.

Possible power valve leaking?

If you are restoring a car there should be evidence of the staple holes on the radiator support.

I used O-rings and the problem was solved.
Texas Swede

+1  Small O-ring and nylon gasket.

Any one know why all of the text on this ad is in Danish on my computer?  The only English is the main ad text - all headers, etc are Danish.  Could I have settings wrong?
Kurt.

I'm pretty sure the instrument panel lights are not powered by the regulator.  They are 12 volts.   My guess is that you may have a loose connection or loose ground.  Get in there and wiggle stuff around with the lights on.
Kurt.

Try AMK I got one a few years ago there.

How do the two years differ?  I've got what I believe to be a 68 pressure line - the sight glass looks smaller than the one pictured.  also have the larger diameter hose that looks same as pictured with a c7ZA number - the plating is hard to see in pictures.
Kurt.

https://www.mustangmarket.com/door.htm

Do Mustang Market panels have masonite (hardboard) backing?  Has anyone tried these?

Branda has them listed:
https://store.cobranda.com/cobubrwbo.html
They are different than stock Mustang brackets and allow for the more forward location of the bumper.

I have been to 3 of these events back years ago 2 in montana and 1 in  calgary alberta canada and they were all great fun events with lots of things to do and see many kool rare cars in the northwest that never come to midwest or eastern shows .

+++1 My wife and I attended 3 or 4 of these back in the '90s.  Billings, Calgary, Spokane - Surprised at number and quality of cars, friendly crowd and beautiful venues.  Fairmont Hot Springs is a great location with a huge natural hot spring pool.

Both of those switches look like the double pin style starting in 1968. At least to me.

+1

Even non tach cars have the resistor wire in line from ignition to coil.  You should be safe putting the tach in series with that circuit. 

They look like vintage Gabriels to me. 

American Pickers creep me out.