Messages

Original ram air hood for a 1968 Shelby 500 KR. I've had this hood for 50 years. Minor damage in the front from an accident, easily repaired, see pictures.

located in Jacksonville, Fl.

$1800 plus crate and shipping costs.

OK here is the question. I bought a 289 HIPO back in the early 80's that was stated to be out of a 63 Cobra, the motor was complete with Webbers and HIPO heads so I bought it. I was not as familiar with the differences on the HIPO and the standard 289 at that time. I took the guys word for it. Over the years I sold the Webbers and the HIPO heads but kept the short block. Now here is the question. The block has the HIPO crank,rods and pistons but the main caps are not the big ones. The block is a April 63 build date and a number stamped on the block on the left bank tab is 3D 196. Did the early HIPO blocks have the bigger main caps? Is this just a standard 289 block with HIPO parts inside?  Thanks

I am still working on 2380 and slowly gathering parts,any suggestions on the correct front suspension parts? 

Original ram air hood for a 1968 Shelby 500 KR. I've had this hood for 50 years. Minor damage in the front from an accident, easily repaired, see pictures.

located in Jacksonville, Fl.

$2000 plus crate and shipping costs.

Yes these are the dark red lenses.

NOS 68 Shelby taillight lenses still in the original Ford box. I have had these for over 40 years. They are in as new mint condition. FOMOCO logo on lens. Perfect for any show car!

$300

I have the wood-grain for the instrument bezel, real wood. Bought it about 40 years ago for my 68 and never used it. It came in a heavy paper tube about 4" in diameter. Still in it.

I have a 68 KR ram air hood that I have had for 40+ years. It has some damage from an accident in the front but it's an easy fix.  It is a Lime Gold original with original paint. PM me if you want pictures. Make me an offer or I'll trade it for a April 64 HPO block.   Thanks

I need a 64 HIPO block from April 64, any help or leads appreciated.

He must have removed it, it was listed under Borg Warner 4 speed rebuilt. The one he pictured was a cast iron 4 speed but in the ad he stated he had an aluminum Borg Warner for a 66 Shelby that he was rebuilding and going to list for sale.

Not mine but it's on Craglist in Ocala Florida. e981c98dba7e3fdcb3b1dfcd75914c1e@sale.craigslist.org

Not mine, I seen this ad on Craglist in Ocala Florida. I don't know if it really is a Shelby Transmission but it's worth a look if you need one. good lick    e981c98dba7e3fdcb3b1dfcd75914c1e@sale.craigslist.org

Well, now I know. Thanks for setting me straight as I sure don't want to sell a repop as an original.  Rolly

I think it is a late 64 Cobra early 65 GT350. I am sure someone out there knows more than I do. I am going by the S1 part number.

A nice original FORD script Intake Manifold. C90X 9424-B   $450.00 plus $50.00 Shipping

A crude REPRODUCTION Cobra intake S1MS9424-z   $400.00 Plus $50.00 shipping. I thought it was real until I posted the pictures.