Messages

Columbus, Ohio and will to drive if reasonable

Rod thanks for asking. The later version is what I am looking for which matches the current original valance.

In need of a rear valance for my 67 GT350. Original is too bent up to salvage and would like to keep the car with original metal. It's the last thing left to get before paint. Send email to Audia4glover@gmail.com if you have one to part out

Pictures please?

Need a 67 trap door with no damage and preferable date stamped between November to January. Please email AudiA4@gmail.com. I have the original which has numerous small dents on the textured side. This is the last piece for the full restoration needed.

Looking for two oem in good condition front strut rods for a 67. Email me at Audia4glover@gmail if you are willing to part out one or two.

Looking for good uses without rust or NOS C6AA-3D746-A power steering fluid cooler. If you have one for sale please PM price. Thanks for any consideration.

I have a NOS dual exhaust rear valance panel for sale the will fit a 67 or 68 Mustang or Shelby. The valance is also in excellent condition and is in red primer. The valance comes in its original box that it was shipped in. The part number stamped on the box and the part is C7ZZ-6540544-D. Price is $550 plus shipping. Email gandcmurphy@rogers.com if interested

Will you do $500 shipped to 43137?

[Lfino]

Lfino- Thanks for the additional pictures and details


Looks like I can capture what what has been presented do far and add a few more to the list of what might be referred to as the two rivet two piece style of lower side scoop or something like that.  Seems like these are maybe the last version of the functional lower scoops in 67 production.

Took some additional time to look for some more pictures of examples and now have 6 cars total by my counting. All built at SA (as listed in registry)  around 4/3-4/19 1967

Car Jeremy referenced is #1430 4/6/67
67-940     4/3/67
67-1427   4/5/67
67-1452   4/6/67
67-1453   4/6/67
67-1551   4/18/67
67-1187   4/19/67

Jeremy's car reference is #1430 4/6/67 to add. Please also note functional brake scoops. That also seems to be a disconnect between early and mid year cars.

Confused. Is this the way most were done?
1551

Jerry, assuming you still own 1551 and scoops never been removed? If so just another example of an April car with an altered production change by Shelby. Also can you confirm if you have functional brake scoops? The car Jeremy started is owned by my wife and I #1430.

Looking for a 67 speedometer cable for 4 speed manual.

Bob good questions and let be expand on the request. Being new to the Shelby forum and really shelby ownership I have tried to research these to death on both SAAC and Mustang Concours forum. I have found very little information on the lug nuts in regards to repo quality vice original comparisons nor anything around the allowance within DII judging. On the caps, I would like to stay original vice reproductions and understand the difference in $$$ between both. Also with caps I found more on the opinions between correct decals vice actual quality standards on the caps themselves. It's all who you talk to and what's accepted at that time. Bottom line I am trying to go DII and would like not waist money where I should not and spend where I should. Probably should have posted under the 67 Shelby thread but wanted to see what's available.

Need to find 10 spoke wheels caps and lug nuts for my 67 GT350 restoration. If you are selling or have any ideas please pm me.

PM sent for timing kits.

Thanks for the replies in forum and PM's. Build date was 3/14/67. Unless there are other opinions need first week of March or before back to January. Heads, if I remember correctly, for the C7ZE are not date coded like the standard 289 but you guys are mush more knowledgeable than me. Found an S2MS and will be picking up today as long as everything matches the picture and thanks to the "engineer".  JD is correct non-thermactor and if there is a standard for date, 30 days or more before build date, please let me know. Dmglover@sbcglobal.net for pictures please. Appreciate the responses!