Sorry if they are of lower quality if you need better ones I'll take some pics today
- Welcome to SAAC Forum.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
1967 Shelby GT350/500 / Re: Throttle linkage and WOT
July 27, 2024, 10:57:33 AM
Okay can do here are some pics of it. You may have to zoom in a little bit I'm sorry.
#3
1967 Shelby GT350/500 / Throttle linkage and WOT
July 27, 2024, 03:36:04 AM
Hey y'all,
I'm new here my father just purchased a 1967 Shelby gt 500 its number 1776 its mean man ill tell ya. But one thing is the gas pedal does not go to the floor at all. I started to look at the throttle linkage for the duals and I noticed when I pushed the throttle as far as it would go the carbs would only barely crack open meaning when the gas pedal is down all the way and the carb linkage is down all the way the carbs aren't at WOT but the pedal is as far as it will go only about 2.5 inches down it has no travel. If I had to guess the man who owned this car before messed with the linkage so you could never take it to WOT so the gas pedal only goes down like 2.5 inches not to the floor. You see me and my dad wanna drive this thing so how do I adjust the linkage so I can actually achieve WOT and the pedal goes to the floor.
Thank y'all,
Air_drewdy
I'm new here my father just purchased a 1967 Shelby gt 500 its number 1776 its mean man ill tell ya. But one thing is the gas pedal does not go to the floor at all. I started to look at the throttle linkage for the duals and I noticed when I pushed the throttle as far as it would go the carbs would only barely crack open meaning when the gas pedal is down all the way and the carb linkage is down all the way the carbs aren't at WOT but the pedal is as far as it will go only about 2.5 inches down it has no travel. If I had to guess the man who owned this car before messed with the linkage so you could never take it to WOT so the gas pedal only goes down like 2.5 inches not to the floor. You see me and my dad wanna drive this thing so how do I adjust the linkage so I can actually achieve WOT and the pedal goes to the floor.
Thank y'all,
Air_drewdy
Pages1