Messages

I would be intrested in The door panels, Bob

I'm wondering whats correct for a 1967 Shelby or mustang? from the dealers

Ok can you take a measurement  not from the center say in 2 places.. latch on  trunk lid does want to clear latch on body.

  I need to know the opening width on 1967 mustang fastback trunk from inner edge to inner edge of tail light metal I get 15 inches. I know this not a Shelby.
Thank you Jess

HI, Did the GT350's use a cooler for power steering,  motor oil? if so could use a photo or 2 on hose routing.
Thanks, jess

What style is correct for my 67 GT350  build? the Oval  or the pricey  Hipo round air filter? Trying to make it look correct
Thanks

I working on my clone and I'm using a ford mini starter.I don't like the idea having it hot all the time.Question is do people fuse this and  what type?  How to wire using harness to dash?
Thank you

Have you talked Jim Marietta he worked for Shelby he states  he might have some info

yes at the outlets thank you for the measurement

Hi,
I'm working on my 67 replica and I  need a measurement on the back section of "H" pipe center to center= trying to set transverse muffler as this would help, Oh I forgot pipe is 2 1/4
Thank you,
Jess

Hi,
I'm work on my 67 and I have a problem. It has factory Disc KH hays calipers. It seems like my hoses are to short to reach frame mount I did the arning drop and the car is on  jack stands. Hoses measure 15 inches long. Any Idea's whats going on and how to correct?

Bob,  check your  messages please,
JessC

I have a guy that has Mustang parts a little bit north of LA Calif.
It is Called MUSTANG  MD  the guy that runs it is Paul.
I have other connections out here in Calif.. not to say they are salvage yards
Just my  $.02
Jess

would the shoulder harness mounting bolts on  mustang  be smaller in Dia. and  longer than seat belt mounting bolts?

I'm building a 1967  Gt350" Clone" not to pass it off as real one. This will NOT be a half A@@ clone !
I have the Branda Roll bar for it  What bolts are used to mount to roof inner side thru ears on roll bar? I have  2 bolts that look like seat belt mounting bolts but smaller in Dia. and longer with same style of bolt head. also ideas on a "nut plate for inside roof  structure .
Thanks, Jess