News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

GT 350 Carb?

Started by Thanx2cs, June 14, 2022, 05:06:41 PM

Previous topic - Next topic

Thanx2cs

Getting some things out of their boxes after many years.  I bought many, many years ago a carb that was supposed to be correct for mid production 65 GT 350.  After closer inspection it is a 3259-1 but a date code of 743.  Did I get a raw deal?

J_Speegle

Since what you provided shows that the carb was assembled/made in the third week of April 1967 I don't think you got what you expected

7 = 1967
4 = April
3 = 3rd week
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

Bob Gaines

Even though the wrong date because of appreciation I bet you could sell it for a lot more then the price you paid many many years ago  ;) If so not such a raw deal after all.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Thanx2cs

What would the applications be for this carb?  If this is a Hi-Po carb then A 67 K-code 289?
I believe i bought the carb and small letter manifold as a package deal.  Never installed on my 65 SFM 5S259.

Bob Gaines

Quote from: Thanx2cs on June 14, 2022, 07:04:56 PM
What would the applications be for this carb?  If this is a Hi-Po carb then A 67 K-code 289?
I believe I bought the carb and small letter manifold as a package deal.  Never installed on my 65 SFM 5S259.
The application would be 67 GT350 with that 67 date code . Only the GT350 came with the list 3259-1 in 67. It was also  typically stamped S2MS-9510-A . The 67 K code used the Ford hipo carburetor .
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

J_Speegle

Quote from: Bob Gaines on June 14, 2022, 08:24:26 PM
The application would be 67 GT350 with that 67 date code . Only the GT350 came with the list 3259-1 in 67. It was also  typically stamped S2MS-9510-A . The 67 K code used the Ford hipo carburetor .

Just to add a little detail or clarify Bob is describing an Autolite 4100 model which makes it very different looking compared to the Holley you have for a late 67 production GT350
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

Helmantel

Speaking of 67 GT350 carbs, did the automatics get the Autolite 4100, like they did in 1966, or did they all get the Holley?

Bob Gaines

#7
Quote from: Helmantel on July 12, 2022, 03:00:09 AM
Speaking of 67 GT350 carbs, did the automatics get the Autolite 4100, like they did in 1966, or did they all get the Holley?
Even though the change to 4100 in early 66 automatic production the S2MS marked Holley's are found to also be in the mix for 67 automatic production. If a Holley was used on a automatic in 67 it would also come with a dashpot unlike what was used on the 4 speed that year.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

JD

the dashpot on a 715 Holley for automatic...
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

Fastbackfred

Does anyone know if the main carb body is the same between the 4118 over the counter gt350 carb, and the lemans 3259 carb? I have heard of guys putting lemans bowls/metering blocks on the 4118 carb for clones, but I can't find the answer to my question. Thanks

Bob Gaines

Quote from: Fastbackfred on October 18, 2024, 10:20:02 AMDoes anyone know if the main carb body is the same between the 4118 over the counter gt350 carb, and the lemans 3259 carb? I have heard of guys putting lemans bowls/metering blocks on the 4118 carb for clones, but I can't find the answer to my question. Thanks
You can put the lemans bowls on the 4118 carb for the 65-67 GT350 look but you don't have to change the metering blocks. Lemans bowls are hard to find and when you do they are typically not cheap. Carls Ford still sells new ones
http://carlsfordparts.com/main.html  for 220.00 each. For now at least.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Fastbackfred

Quote from: Bob Gaines on October 18, 2024, 10:54:08 AM
Quote from: Fastbackfred on October 18, 2024, 10:20:02 AMDoes anyone know if the main carb body is the same between the 4118 over the counter gt350 carb, and the lemans 3259 carb? I have heard of guys putting lemans bowls/metering blocks on the 4118 carb for clones, but I can't find the answer to my question. Thanks
You can put the lemans bowls on the 4118 carb for the 65-67 GT350 look but you don't have to change the metering blocks. Lemans bowls are hard to find and when you do they are typically not cheap. Carls Ford still sells new ones
http://carlsfordparts.com/main.html  for 220.00 each. For now at least.
I have all the parts, but I know for a fact that the 65/6 gt350 lemans carbs run leaner than the 4118 replacements. Holley reworked them for the smaller 289. I was hoping that the 4118 body was identical to the 3259 body except for the list number stamping. All I'm missing is the 3259 body.