9F03R481878 on BAT

[5s386]

https://bringatrailer.com/listing/1969-ford-shelby-gt500-6/

[Bill]

https://bringatrailer.com/listing/1969-ford-shelby-gt500-6/

One mans restored is another ........
I'll just leave this here

[FL SAAC Team Leader]

Nice car !

[Coralsnake]

He says it is well known in the SAAC community

So is 1968 #3900 😂

That might not be a good thing

[Special Ed]

Well if you think about it shelby owned all of our cars as his name is still on them all RIGHT   haha

[SCJSTU]

https://bringatrailer.com/listing/1969-ford-shelby-gt500-6/

One mans restored is another ........
I'll just leave this here

What the heck? Did the original plate get cut out with a torch?

[Coralsnake]

Not to mention they are in the wrong positions and reproductions

I noticed that who ever replaced the floor pan used a pan that doesnt even have open drain holes. 

Please have the car inspected if you're interested

Just my opinions, but certainly not up minimum standards.

[Special Ed]

Dont know how u can get tags in wrong place as the holes are different sizes on the 2 tags.

[Coralsnake]

Which leads to ...is it a 1969 door?

[shelbymann1970]

Not to mention they are in the wrong positions and reproductions

I noticed that who ever replaced the floor pan used a pan that doesnt even have open drain holes. 

Please have the car inspected if you're interested

Just my opinions, but certainly not up minimum standards.

pass inner door or skin is neither 69 or 70. DS door appears to be a 70 door but hard to tell. Need a better closeup of the bottom  inner corner

[SCJSTU]

question to seller who restored the car....he states well known by the Shelby community but does not know who restored the car? Huh?

[Bill]

question to seller who restored the car....he states well known by the Shelby community but does not know who restored the car? Huh?

I love the quality of the paintwork in the picture above. I didn't look any further.

[Coralsnake]

It doesnt really matter who did it, its more about how it was done.

[shelbymann1970]

Here are 2 door pics. driver's door appears to have the indention for the 70 Mach1 molding and the outer skin hem isn't right. On the pass door ZERO panel stiffeners in the area marked plus the hem metal was never like that on a 69 or 70 door so a repo door.

[shelbymann1970]

question to seller who restored the car....he states well known by the Shelby community but does not know who restored the car? Huh?

You are SCF100...