Anyone care to take a shot?

[Coralsnake]

I dont think they are 10 spokes.

Any care to guess their origin?

https://www.ebay.com/itm/186803367732?_trkparms=amclksrc%3DITM%26aid%3D777008%26algo%3DPERSONAL.TOPIC%26ao%3D1%26asc%3D277962%26meid%3D3233f2dc56e247fca2aee34ad226946e%26pid%3D101949%26rk%3D1%26rkt%3D1%26itm%3D186803367732%26pmt%3D0%26noa%3D1%26pg%3D4375194%26algv%3DRecentlyViewedItemsV2WithMLRPboosterPurchaseFilter_BP%26brand%3DShelby&_trksid=p4375194.c101949.m162918&_trkparms=parentrq%3A9b761edb1930ab4c3b2bf5bbfffff748%7Cpageci%3Ac9a5cda9-b3ba-11ef-bce9-72977920aaf2%7Ciid%3A1%7Cvlpname%3Avlp_homepage

[azdriver]

Should be no problem to find a 4th wheel to make a set huh???

Pat

[Engineer]

They are 10 spokes.

At some point, someone put them on a mill or lathe and removed the raised portions (ribbing) of the spokes.

Leaving a flat spoke. If someone wanted to make a fourth, it could be done.

[Coralsnake]

Have you seen the "reverse" taper before?

I think we can rule out them being from 1966 or having an "S2" part number?

[propayne]

Don't know that you'll find anything here and there is a lot of info to sift through, but if you're not familiar with it already, this is a great resource.

https://vintagewheelcatalogs.com

- Phillip

[Chris Thauberger]

Don't know that you'll find anything here and there is a lot of info to sift through, but if you're not familiar with it already, this is a great resource.

https://vintagewheelcatalogs.com

- Phillip

What a great resource Phillip, thanks for the link.

[Coralsnake]

Well that will give me something to do

[s2ms]

They are 10 spokes.

At some point, someone put them on a mill or lathe and removed the raised portions (ribbing) of the spokes.

Leaving a flat spoke. If someone wanted to make a fourth, it could be done.

+1, 66 originals. I've seen a few sets done like this, not sure why anyone would want to do it...

[Coralsnake]

They were 15 inch ?

Looking at photos they do look similar...I-can see it

[s2ms]

66 10-spokes are 14-inch. I've found people unfamiliar with wheel dimensions sometimes measure the total OD and quote that, which is 15 inches in this case.

[Coralsnake]

So, Im going with it is...

A modified 1966 rim that has been measured incorrectly

Thank you everyone

[67 GT350]

My guess is since they have been mutilated, they are next to worthless. Just my opinion, one man's

[98SVT - was 06GT]

Since multiple sets have been seen I'd wager they were done by CS's wheel company as an attempt to update wheel styling
to keep selling them - or not........

[Bob Gaines]

Since multiple sets have been seen I'd wager they were done by CS's wheel company as an attempt to update wheel styling
to keep selling them - or not........

Not a big deal ether way because they are undesirable regardless but I am of the opinion this was not a CS wheel company variation but modified by someone else.

[68blk500c]

It would be interesting to see if they would balance.