67 bracke caliper identification

[krconvertman]

what would identify assembly line brake calipers on a 67 GT350 and 500? Casting numbers no doubt but what ones please.

[J_Speegle]

When was the car completed at San Jose?


For the basics the 350 and 500 used the same calipers for the same production periods

[krconvertman]

Jeff I have and am working on multiple cars spanning from a December GT500, a Late February GT350 and am April GT500

[TLea]

Early cars had same as 65-66 with 3/8 hose. Later had 7/16 with tell tale reinforcing bar. Your dates if Ford build date would suggest all are the later

[theresa2]

Assembly-line calipers on late '66 into '67 GT350/GT500 typically had Kelsey-Hayes casting numbers like C7ZX-2B120-A or similar. Look for the reinforcing bar on later units (post-Jan '67), plus 7/16 hose fitting vs early 3/8. Your dates suggest you'll find mostly the later ones.

Some also had a small "KH" oval cast in. Originals differ slightly from service parts, so double-check those fine details. 😊

[Bob Gaines]

Assembly-line calipers on late '66 into '67 GT350/GT500 typically had Kelsey-Hayes casting numbers like C7ZX-2B120-A or similar. Look for the reinforcing bar on later units (post-Jan '67), plus 7/16 hose fitting vs early 3/8. Your dates suggest you'll find mostly the later ones.

Some also had a small "KH" oval cast in. Originals differ slightly from service parts, so double-check those fine details. 😊

Do you have a picture of a caliper with a C7ZX-2b120-A casting number?

[TLea]