Transmission ID Help

[Fastback66]

Trying to determine the correct transmission ID and markings that should be on my 67 GT350 was built 4/25/67 car #2087.
I'm a rookie here when if comes to transmission markings and decoding, any help would be greatly appreciated.

Thank you.

[Rickmustang]

If it's a standard, check out David Kee Toploader's site. He has an I'd chart.

[Fastback66]

It's a standard, thanks I'll check it out.

[Fastback66]

Were the 67 GT350's with standard trans a wide or close ratio? Or both?

[gt350hr]

 Close , no wide.

[capecodmustang.com]

The transmission tag should be Rug, Rug 1 or Rug 2....

Your car is a 4 speed and it should be very easy to determine if it's original to the car.
The Ford number is stamped on the bottom and very easy to access

[Fastback66]

The car is missing the correct transmission. I'm trying to source a date correct transmission.

[GT350DAVE]

Transmission could be an HEH-BX depending on when the car was built. Contact 67 Registrar at dmathews@prodigy.net for correct transmission and tag info.

[JD]

This is where to look for a Ford VIN stamping...

and on the other (passenger side) where the transmission tag would attached.

also Part engineering ID and the casting date code (red oval area) which was a screwed on tag into the casting mold and sometime are upside-down.

(Note the Image file names are not related to the car VIN's on these two images)