Round bare spots

[DRGT350]

Forum -
Were there 4 or 6 round spots with no paint ( primer or other ) on the underside ( no paint as the cars were supported there?
Not sure on 4 or 6 - as were the two oval holes near radiator support also with the bare spot?
And.. what is the diameter of the spots ?

Thanks in advance for your knowledge and help !

Dave

[Coralsnake]

My friend, Mr Speegle, knows about these prepaint spots

From concoursmustang.com

http://concoursmustang.com/speegle/Articles/Article-DollyMarksCMF2018v4.pdf

[J_Speegle]

Twelve total if you count inside the car and under. You'll want to reproduce the look of galvanized steel for some locations and bare steel at others and leave the simulators in place during all of the painting steps for the car. These are also covered in the undercarriage article thread below. Link to that article there. Page #6

http://www.saacforum.com/index.php?topic=2207.msg18911#msg18911

[DRGT350]

Thanks Jeff - this is great !

[Coralsnake]

The oval holes were for the dolly and served dual purpose of being able to accept the tie down hooks when the vehicle was transported

[Special Ed]

14 bare metal circles total unless cougar depending on plant in Dearborn and SJ  12 if MT

[CharlesTurner]

14 bare metal circles total unless cougar depending on plant in Dearborn and SJ  12 if MT

Talking '65's here, should only be 12.