News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

Steering Box/Idler Arm Attaching Bolts & Washers

Started by greekz, August 19, 2020, 03:31:15 PM

Previous topic - Next topic

greekz

I do not have the Chassis Assembly Manual for 1966, but the 1967 Manual indicates the steering box and idler arm bolts and "D" washer are steel, not phosphate and oil.  Would this be true for 1966 as well?

Thanks,

Greek
SFM 6S1134  '67 GT-350 #2339

Bob Gaines

Quote from: greekz on August 19, 2020, 03:31:15 PM
I do not have the Chassis Assembly Manual for 1966, but the 1967 Manual indicates the steering box and idler arm bolts and "D" washer are steel, not phosphate and oil.  Would this be true for 1966 as well?

Thanks,

Greek
Same same. If you want to help with maintenance then do a light phosphateon the those washers and bolts. It will not change the appearance to dark like a full treatment yet the phosphate even lightly done will provide a grab on surface for any rust inhibitor product you choose to use . The rust inhibitor will stay on longer.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Shawn

Is there a 1966 Chassis Manual available?  If not which would be best for reference 64-65 or 67?

Bob Gaines

Quote from: Shawn on August 19, 2020, 04:39:27 PM
Is there a 1966 Chassis Manual available?  If not which would be best for reference 64-65 or 67?
No 66 manual available. Best to use the 64 1/2 65 version rather then the different body style 67. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby


J_Speegle

You can also use gun bluing repair fluid and a brush or steel wool to touch up or reproduce both phosphate and dark heat treated surfaces depending on how you apply and finish the metal. Then oil or protective coat to keep them from rusting it that is a problem in your region.
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

greekz

SFM 6S1134  '67 GT-350 #2339

J_Speegle

Just as a note. I've found the finish of the three steering box bolts and the two idler arm bolts protected inside the frame rails on unrestored Calif cars to be darker (as in hardened) metal finish. If you notice ( not going to post a clip since they are copy written) in the recently released Petersen Pub pictures that were linked on this site, you can make out this difference. Focusing on just 65 and 66's for this discussion

In the picture the tone of the metal is darker than the pittman arm but similar to the center link IMHO
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge