News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

Choke cable mounting position

Started by cascade-classics, December 18, 2020, 09:27:40 AM

Previous topic - Next topic

cascade-classics

Does anyone have a good picture of the exact position the choke cable is mounted under the dash on a 67 GT350?   Most pictures show it under the heater controls but are too far away to see what exact holes are used. 

Thanks.

JD

#1
Quote from: cascade-classics on December 18, 2020, 09:27:40 AM
Does anyone have a good picture of the exact position the choke cable is mounted under the dash on a 67 GT350?   Most pictures show it under the heater controls but are too far away to see what exact holes are used. 

Thanks.

First photo I could find - IGNORE THE "CHOKE" LABEL that was a owner added thing in this car and was never a factory item.

Yes the assembly book show this is where the choke operator end is located.

Hope this helps...

here is another of that same one and one with the "C", seems not all cars got the "C" on the pull-knob (probably why the owner of the other car added the label).

'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

cascade-classics

#2
Found this over on concours Mustang.  Looks like it is right against the kick panel. 

http://www.concoursmustang.com/forum/index.php?topic=16472.0

Thanks for your help.

Bob Gaines

Quote from: cascade-classics on December 19, 2020, 09:45:42 AM
Found this over on concours Mustang.  Looks like it is right against the kick panel. 

http://www.concoursmustang.com/forum/index.php?topic=16472.0

Thanks for your help.
Yes just like the picture JD previously posted.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

J_Speegle

Quote from: cascade-classics on December 19, 2020, 09:45:42 AM
Found this over on concours Mustang.  Looks like it is right against the kick panel. 

http://www.concoursmustang.com/forum/index.php?topic=16472.0

Thanks for your help.

That does appear to be a 66 discussion thread
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge