Wanted parts for shelby 67 GT500

[Kyle]

I need all original parts 2X4 Cobra air cleaner , dual point distributor (C5AF) dated late 1966 , FE 390GT or 428PI exhaust manifolds dated late 1966 , rear antiwrap up snubbers , pinion snubber , front 2 piece nose fiberglass , C7ZA engine mounts insulators and Big block radiator for automatic dated late 1966.

Thanks Kyle.

[mtdubvee]

I've got an all original 67 air cleaner. PM me.

[TA Coupe]

I think there are 2 different bottoms depending on when your car was produced. Do you know which bottom you need if that is so? Somewhere around here I have both bottoms.

Roy

[Bob Gaines]

I think there are 2 different bottoms depending on when your car was produced. Do you know which bottom you need if that is so? Somewhere around here I have both bottoms.

Roy

Sand cast bottom goes with a sand cast top/lid. Die cast ribbed bottom is for later cars and goes with a die cast top/lid.There was no mixing of the styles from the factory.  The Cobra letters on the lids are different from each style. The sand cast bottom side of the top/lid is slightly thicker and heavier compared to the thinner lighter die cast top/lid. The die cast top/lid has eraser sized injection mold marks visible on the bottom side.