WTB - 65 GT350 Oil pan, intake, horn switch bezel nut

[mygt350]

Am looking for 3 things:
1. Original horn switch bezel nut for metal thread switch. Just the bezel nut.
2. Original unmolested Cobra Small Letter intake with S1MS 9424A cast into runner behind carb with firing order and PCV port. No cracks or alterations please.
3. Original Cobra 65 GT350 oil pan with correct casting number on bottom.
Please e-mail pics etc., to mygt350@aol.com
Thanks

[mygt350]

Have located a nice oil pan so its off my want list and I have a good lead on a horn switch bezel nut so it too is off my list.

However, I am still looking for a nice unmolested S1MS 9424A small letter 65 GT350 Intake with a PCV port on rear runner.
Please e-mail pics of top and bottom side to MYGT350@AOL.COM
Thanks

[mygt350]

Bump
Still looking for a nice unmolested 65 GT350 S1MS-9424A stamped intake with PCV port on rear runner.
Found a nice pan (thanks Craig) and horn bezel nut (thanks Jimmy).

[mygt350]

Bump
Still looking for original 65 GT350 unmolested Cobra Small Letter intake with S1MS 9424A cast into runner behind carb with firing order and PCV port. No cracks or alterations please.
Also looking for a original 65 GT350 correct coil to cap wire. Has straight connector at coil and 90 at cap.
Thanks

[mygt350]

Bump
Found correct coil to dist cap wire. Thanks Brant.
Still looking for the intake though...

[mygt350]

Bump
Still looking for a nice unmolested 65 GT350 S1MS-9424A stamped intake with PCV port on rear runner.
PM or email to mygt350@aol.com

[mygt350]

some one gotta have a nice S1MS small letter PCV intake squirted away somewhere. Really want to put finishing touch on this engine.