News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

Dash pot purpose and function

Started by Corey Bowcutt, February 21, 2022, 01:26:46 PM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 4
User actions

shelbymann1970

#45
February 23, 2022, 12:20:44 PM Last Edit: February 23, 2022, 12:24:23 PM by shelbymann1970
Quote from: Corey Bowcutt on February 23, 2022, 12:14:54 PM
By the way that sketch is from me.

Corey
Yes, and thanks again.  I actually printed up the pic and bent it to the pic. It is done now. I saw the pic of the one above mounted with the spring  and the base is bent/curved. I see your pic(huge on my screen) shows the spring with the clip(had to scroll over to see. Nice shot. I saved that pic
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

Royce Peterson

#46
February 23, 2022, 02:14:30 PM
The one in my picture is bent - don't recall how that happened but it should be similar to the drawing.
1968 Cougar XR-7 GT-E 427 Side Oiler C6 3.50 Detroit Locker
1968 1/2 Cougar XR-7 428CJ Ram Air C6 3.91 Traction Lock

QuickSilverShelby

#47
February 23, 2022, 10:28:59 PM
Quote from: Royce Peterson on February 22, 2022, 06:29:53 PM
This is a typical Autolite dash pot and bracket. I don't think any new ones are available.




That is an amazing photo.  I have no words to express.

QSS
You miss 100% of the shots you don't take.

shelbymann1970

#48
March 02, 2022, 06:03:21 PM
Found this pic on my IPhone downloading pics.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626
Print
Go Up Pages 1 2 3 4
User actions