Mustang 1967 Shelby GT500 power steering pump pully.

[Kyle]

What is the correct power steering pump pulley for a Mustang 1967 Shelby GT500 ?

Thanks Kyle.

[JD]

Look at these threads:
https://www.saacforum.com/index.php?topic=2046.msg17267#msg17267

https://www.saacforum.com/index.php?topic=4019.msg35130#msg35130

[Kyle]

My car doesn't have AC.

[JD]

read the third fourth reply in the first link!

Sorry, I referenced the wrong reply.

[Kyle]

Ok thanks , so my pulley for my car need's to be 7AB?
I bought a complete  power steering pump with pulley, but I think the pulley is not correct for my car.
Here is my pulley.

[shelbydoug]

That actually resembles the 7AB but I think that the 6AA looks like it but is a different outside diameter.

The stamping on the originals can be very lightly done. The reproductions generally have a heavier stamping.

This one is mine and is 5-3/8" od. It is a 7AB.


When you press them on the tip of the shaft needs to be sticking out 1/8" or so and the back of the pulley should only have a few thousands clearance to the face of the pump.

It's a strange pulley in a lot of ways and the normal "installation tool" won't seat it far enough on the shaft.

[Kyle]

Ok thanks everyone , I will try to find a 7AB pulley.

[Carl111]

Is that pat number on the pulley? If not, how is it identified? What is the diameter?

[shelbydoug]

It is stamped 7AB.

http://mustangtek.com/pulley/7AB.html