News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

stripes

Started by johnzajc@gmail.com, November 25, 2018, 08:10:11 PM

Previous topic - Next topic

johnzajc@gmail.com

Hi---Is there any common mistake in correctness  that instalers make on 69 Shelbys---thank you

Bob Gaines

Quote from: johnzajc@gmail.com on November 25, 2018, 08:10:11 PM
Hi---Is there any common mistake in correctness  that instalers make on 69 Shelbys---thank you
Lining up the front end of the stripe with the rear end section is the most common error IMO. The rear end stripe middle section is supposed to be centered over the rear marker light opening. Besides that the cut out for the opening at the rear marker light was done by cutting a X into the material and folding the material inside the opening .There should be triangle sections of stripe seen from the trunk side in each direction from the sides of the marker light opening. Most restorers just cut out a rectangle hole in the stripe material at that spot. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

johnzajc@gmail.com

Thank you---time to do it again, I just new we installed it wrong. tanks again