News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

1967 Mustang GT Factory K Code - Stark Hickey Ford Trans Am Race Car

Started by silverton_ford, January 30, 2018, 11:27:59 AM

Previous topic - Next topic

silverton_ford

No affiliation with this car, just posting to spread the word and for discussion.

Access the ad here: https://www.hemmings.com/classifieds/cars-for-sale/ford/mustang/2025435.html

SELLER'S DESCRIPTION:

Location: New Milford , Connecticut, 06776
VIN #: 7F01K222634
Transmission: Manual
Condition: Excellent
Exterior: White
Interior: Black

Seller's Description:
1967 Ford Mustang GT factory K-code HiPo car, 1 of 77 built. Special ordered through Stark Hickey Ford-Royal Oak Michigan by a FoMoCo Dearborn engineer. Soon thereafter sent to Kar Kraft Engineering for race prep. KK parts from front to the rear of this car. Sponsored by Stark Hickey Ford. Raced SCCA A/S at regional and national level as well as FIA rally events from 1967-75. Rare FoMoCo stamped flared fenders and quarter panels. Four wheel disc brakes, Lincoln fronts and Mustang rears. Vintage 1967 and 1971 dated dbl adj Koni shocks rebuilt/restored by Koni, new Dart 4-bolt main 302, early TFS cast iron heads, roller cam, shaft rocker assys, titanium valves, lightweight crank, Bud Moore style T/A oil pan, Tilton clutch assy, Ford 2-4V intake casting number C6OA-5424-A, airbox is a '68 Team Shelby T/A style, custom made S/S headers, close ratio Toploader 4 spd built by Ford Engineering X shop", 9 inch rear, 31 spl Detroit locker, 4.11 R&P, Ford engineering staggered shock rear, narrow T/A rear springs, DOZX rear track bar, aluminum driveshaft, alum Pyrotect fuel cell, SW gauges, Jones tach, MSD box w/rev limiter hidden behind glovebox door, Lifeline fire system, 15"x 8" magnesium American Racing Torque Thrust wheels on Goodyears. Original data plate on drivers door, VIN numbers in both inner fender aprons, body buck tag, extensive paperwork, photos, log books and a SMTS die cast model of the car (1 of 10 produced). Car has 4 hours on it since the 2015-16 bare metal rotisserie restoration.

Bob Gaines

Quote from: silverton_ford on January 30, 2018, 11:27:59 AM
No affiliation with this car, just posting to spread the word and for discussion.

Access the ad here: https://www.hemmings.com/classifieds/cars-for-sale/ford/mustang/2025435.html

SELLER'S DESCRIPTION:

Location: New Milford , Connecticut, 06776
VIN #: 7F01K222634
Transmission: Manual
Condition: Excellent
Exterior: White
Interior: Black

Seller's Description:
1967 Ford Mustang GT factory K-code HiPo car, 1 of 77 built. Special ordered through Stark Hickey Ford-Royal Oak Michigan by a FoMoCo Dearborn engineer. Soon thereafter sent to Kar Kraft Engineering for race prep. KK parts from front to the rear of this car. Sponsored by Stark Hickey Ford. Raced SCCA A/S at regional and national level as well as FIA rally events from 1967-75. Rare FoMoCo stamped flared fenders and quarter panels. Four wheel disc brakes, Lincoln fronts and Mustang rears. Vintage 1967 and 1971 dated dbl adj Koni shocks rebuilt/restored by Koni, new Dart 4-bolt main 302, early TFS cast iron heads, roller cam, shaft rocker assys, titanium valves, lightweight crank, Bud Moore style T/A oil pan, Tilton clutch assy, Ford 2-4V intake casting number C6OA-5424-A, airbox is a '68 Team Shelby T/A style, custom made S/S headers, close ratio Toploader 4 spd built by Ford Engineering X shop", 9 inch rear, 31 spl Detroit locker, 4.11 R&P, Ford engineering staggered shock rear, narrow T/A rear springs, DOZX rear track bar, aluminum driveshaft, alum Pyrotect fuel cell, SW gauges, Jones tach, MSD box w/rev limiter hidden behind glovebox door, Lifeline fire system, 15"x 8" magnesium American Racing Torque Thrust wheels on Goodyears. Original data plate on drivers door, VIN numbers in both inner fender aprons, body buck tag, extensive paperwork, photos, log books and a SMTS die cast model of the car (1 of 10 produced). Car has 4 hours on it since the 2015-16 bare metal rotisserie restoration.
It appears to be restored as a 68 TA car and not a 67 TA.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

gt350shelb

I know the car and the owner it is  very well documented and beautifully restored race ready car .
Some where some one is driving their collector car for the last time but they don't know it . Drive your car every time like it could be the last memory of it .

Shelby_r_b

Nothing beats a classic!


Bigfoot

RIP KIWI
RIP KIWI

Richstang

Nice find and thank you for sharing.

I'm trying to find some of the tracks it raced at. Too bad they didn't add that provenance to the listing.
It looks like some photos show Bill Clawson, Don Lacombe sp?, and Larry Beapre sp? as the drivers.

1967 Shelby Research Group 

www.1967ShelbyResearch.com
www.facebook.com/groups/1967shelbyresearch

1991-1993 SAAC MKI, MKII, & Snake Registrar

gt350shelb

Some where some one is driving their collector car for the last time but they don't know it . Drive your car every time like it could be the last memory of it .

Richstang

1967 Shelby Research Group 

www.1967ShelbyResearch.com
www.facebook.com/groups/1967shelbyresearch

1991-1993 SAAC MKI, MKII, & Snake Registrar