Spacer/Filter between Booster and Mater cylinder orientation

[Corey Bowcutt]

I got my Booster and MC back from refurbishing and ready to reinstall but I can not remember what orientation the spacer/filter between the two units.  Should the filter be on the top or bottom?  I assume bottom but want to make certain before I install.

Thank you,

Corey

[Royce Peterson]

Little side up, filter down.

I got my Booster and MC back from refurbishing and ready to reinstall but I can not remember what orientation the spacer/filter between the two units.  Should the filter be on the top or bottom?  I assume bottom but want to make certain before I install.

Thank you,

Corey

[Corey Bowcutt]

That is what I figured.  Thank you Royce.

[The Going Thing]

Corey: Be sure to make sure the rubber inner boot is seated flush with the face of the booster so it doesn't get cut when you tighten up the master cylinder.