News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

GT350 build date 1/8/69 Under Hood, doors and trunk stickers

Started by SChatman, September 04, 2020, 11:45:42 AM

Previous topic - Next topic

SChatman

Looking for pictures with correct placement of stickers and if possible close ups so I'll know which are correct, tire pressure sticker is a big question because I'm not seeing one for the E70-15 tires my car is supposed to have
Thanks in advance.

Bob Gaines

Quote from: SChatman on September 04, 2020, 11:45:42 AM
Looking for pictures with correct placement of stickers and if possible close ups so I'll know which are correct, tire pressure sticker is a big question because I'm not seeing one for the E70-15 tires my car is supposed to have
Thanks in advance.
The E 70 15 sticker is available .It is the same one used on 67 and 68.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby


J_Speegle

For your other decal/stickers. Body style might help just so we can provide the closest matching original examples
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge


TOBKOB

1969 GT350 owned since 1970

J_Speegle

Here is a start from memory for a Jan built GT350 fastback


Interior

Tire pressure stickers in the glove box and Mustang one of the drivers door. For that period most likely the C9ZA-B version. You already have pictures of the glove box Shelby one


Trunk

Trunk lid - Space saver, Federal Highway and jacking instructions

Jack - small white one on the side of an arm


Engine Compartment

Air cleaner - Cubic inches and AUTOLITE filter

Drivers side shock tower - Timing/Emission decal

Below the timing/Emissions is typically the Service Spec sticker

Engine - Engine ID  torn  from roll so the ends have jagged straight look

Passenger forward  inner fender panel - Battery inspection Filled out with round inspector stamp

Voltage regulator - red paper label/tag around the condenser pig tail. Held in place with two staples

Spark plug wire ID stickers -

If you have air conditioning there are more decals related to those items

Of course throughout the car wire looms with have ID and assembler labels

And also a bunch of the small square inspector check stickers in the engine compartment and interior
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

SChatman

Thanks Jeff, Ive attached this decal do you know where it goes? NPD says it belongs with a Group 24 battery.

Bob Gaines

Quote from: SChatman on September 05, 2020, 10:47:38 PM
Thanks Jeff, Ive attached this decal do you know where it goes? NPD says it belongs with a Group 24 battery.
Not Jeff but a GT350 in 69/70 could come with a 24 F battery or a 27 F battery . If your car came with a 24F then it would go on a original  or reproduction of original battery. I wouldn't put it on a later Motorcraft or aftermarket battery.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

SChatman

Thanks Bob, I have a generic plain battery with the  Faux battery top cover on it.