1966 NOS or original OEM Ford radio speaker

[kingchief]

Hi,

Does anyone have a spare radio OEM Ford radio speaker??? NOS would be better but since I have a project going on under the dash [changing out heater core...ugh], I thought it would be nice to tackle this task. The radio is original to 406 so OK there. Does not have to be perfect but must work!

Thanks again,

Steve

[68cobra427]

Try Harland in Washington state, he has tons of parts and some nos.  1-509-627-8264 after 9 am PNW time, M-Sat



Troy

[outlawincorporated]

STEVE

i have one NOS 65/66 dash speaker left over from my last retoration if interested
price is $435usd plus shipping.

drop me a PM

regards

PHILL BERESFORD
MELBOURNE.
AUSTRALIA.

[hertz350]

Here is one on EBay.  https://www.ebay.com/itm/164757895103?ViewItem=&vxp=mtr&item=164757895103

[Bob Gaines]

Hi,

Does anyone have a spare radio OEM Ford radio speaker??? NOS would be better but since I have a project going on under the dash [changing out heater core...ugh], I thought it would be nice to tackle this task. The radio is original to 406 so OK there. Does not have to be perfect but must work!

Thanks again,

Steve

If you have the speaker but the the cone is damaged you can send it off to be re coned for under 100.00. Of course if you don't have a correct core to send off this doesn't help.

[kingchief]

Thanks all. No, the one that I have was installed during the restoration. It is of foreign origin!!! I shall watch this one on epay.

Cheers and thanks all.

Steve

[kingchief]

Just looked at the details on the ebay one and it has a C9 serial number. I would want C6 at the least!

Age sometimes fogs the brain! It would be better than my current repop BUT for that much and the work better to get what I need!

Cheers,

Steve

[kingchief]

Anyone have a picture of a properly installed dash speaker??? Just received my OEM speaker back from reconing and would like to reinstall correctly. Told only use 2 screws diagonally. Question: Mounted from top or underneath? Are little rubber bumpers part of the install? Tried searching but no luck with photos.

Thanks again,

Steve