News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Cobra vs Corvette...Car Life Magazine, August '64

Started by honker, November 17, 2018, 10:08:10 PM

Previous topic - Next topic

honker

There was another thread on the forum where a '67 GT500 was tested against a '67 427 Corvette.
This is along the same lines, but 289 Cobra versus 327 fuel injected Corvette.
The Cobra is quicker, but has a definite weight advantage.

BGlover67

Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

Side-Oilers

Kind of surprised the Vette wasn't any quicker than it was. It had the Fuelie engine and 4.11 gears. That's as good as it got for a Vette in 1964.
A 289 Cobra would still smoke it, of course!
Current:
2006 FGT, Tungsten. Whipple, HRE 20s, Ohlin coil-overs. Top Speed Certified 210.7 mph.

Kirkham Cobra 427.  482-inch aluminum side-oiler. Tremec 5-spd.

Previous:
1968 GT500KR #2575 (1982-2022)
1970 Ranchero GT 429
1969 LTD Country Squire 429
1963 T-Bird Sport Roadster
1957 T-Bird E-model


JD

'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

mark p

One local guy near here tried to "solve" this issue for a 327 'Vette in his own way... per the trunklid graphics.
https://www.hotrod.com/articles/corvette-barn-find-period-perfect-race-car-blast-past/

"I don't know what the world may need, but a V8 engine's a good start for me" (from Teen Angst by the band "Cracker")

66 Tiger / 65 Thunderbird / '22 Mach 1

2112

Quote from: mark p on November 18, 2018, 12:03:18 PM
One local guy near here tried to "solve" this issue for a 327 'Vette in his own way... per the trunklid graphics.
https://www.hotrod.com/articles/corvette-barn-find-period-perfect-race-car-blast-past/

Goes well with the masterfully built hood scoop, foot pedals and supercharger belt guard.

Mikelj5S230

#7
I have 3 '64 fuelies (one AJ Foyt drove in AP) and I have had a 289 Cobra (with Webers), and there is no comparison.  The '64 380 fuel unit was the best  there was in the day, but the engine with that Duntov cam had next to no low end torque and a 4.11 was the only rear end choice to get it launched easily.  Above 4000 rpm is where the fuelie came alive, long after the 289 was gone. The 289 was much better off the line, no doubt, and of course the races in '64 showed the advantage of so much less weight in the Cobra.  And BTW, you could not get power steering with a fuelie.
Formerly known as CorvetteMike.

Ldouble619

#8
Quote from: CorvetteMike on November 18, 2018, 01:19:32 PM
I have 3 '64 fuelies (one AJ Foyt drove in AP) and I have had a 289 Cobra (with Webers), and there is no comparison.  The '64 380 fuel unit was the best  there was in the day, but the engine with that Duntov cam had next to no low end torque and a 4.11 was the only rear end choice to get it launched easily.  Above 4000 rpm is where the fuelie came alive, long after the 289 was gone. The 289 was much better off the line, no doubt, and of course the races in '64 showed the advantage of so much less weight in the Cobra.  And BTW, you could not get power steering with a fuelie.

Quote from: Ldouble619 on November 17, 2018, 11:41:59 PM
Enter CorvetteMike, in 3, 2, 1....

You're late


Mikelj5S230

#9
I know, sorry, I had other TDBs to comment on......... 8)

Here is the '64 fuelie, big brake tanker I have that AJ drove.....
Formerly known as CorvetteMike.

BGlover67

Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

Mikelj5S230

Thanks, but not nearly as fast as a '64 Cobra....... :)
Formerly known as CorvetteMike.

mark p

"I don't know what the world may need, but a V8 engine's a good start for me" (from Teen Angst by the band "Cracker")

66 Tiger / 65 Thunderbird / '22 Mach 1