Gt500 convertible seat belts

[thefordshow]

Any one know the order the seat belts were attached on the hump?  Lap belt first, the shoulder belt on top?, or the other way around?  Thanks.

[Bill Collins]

Here is what I have from the factory assembly manual and some archived photos. Note use and placement of spacers.

[thefordshow]

Thank you Sir! So looks like the lap belt end gets stacked on the shoulder belt looking at the circled "A" diagram.  That's what I needed to know.

[JWH]

Interesting to look at the diagram and notice the lower washer, the spacer and the upper washer are different part numbers. Therefore a difference in parts. I will have to look closely at mine again and note the differences.

[Bill Collins]

The three washers are each distinct in finish, diameter and thickness. The bottom one, which is not visible in the photos, is a large diameter grey finish commonly found on most Mustang applications. The middle one is a thick chrome spacer. The top one has a textured face and is typically red cadmium plated. This one is again also found on many standard Mustangs. See the attached photo.

[JWH]

Thanks Bill for the excellent and very helpful pictures.