News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

Smog equipment

Started by 98SVT - was 06GT, January 23, 2018, 02:26:03 AM

Previous topic - Next topic

98SVT - was 06GT

Just bought a 1966 Tbird with a 390. It's got the air pump all the hoses brackets heads etc. Is it usable/same as on GT500? I'm going to end up with my 428CJ in it so I won't need the emissions stuff.
Previous owner 6S843 - GT350H & 68 GT500 Convert #135.
Mine: GT1 Mustang, 1998 SVT 32V, 1929 Model A Coupe, Wife's: 2004 Tbird
Member since 1975 - priceless

Bob Gaines

Quote from: 06GT on January 23, 2018, 02:26:03 AM
Just bought a 1966 Tbird with a 390. It's got the air pump all the hoses brackets heads etc. Is it usable/same as on GT500? I'm going to end up with my 428CJ in it so I won't need the emissions stuff.
The short answer is about half of it is the same. The other half is different. The alt adjusting bracket is different and most like the driver side smog tube.  The pulleys will all be different. You can also use most of the hoses. The 66 smog parts are completely different then 68-70 CJ stuff but the 66 smog parts will fit on the CJ engine the same way as on a 67 PI.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

J_Speegle

Think you'll find that little is usable especially if you take into consideration that there are a number of running changes during the production year for your Shelby so more differences (parts not matching) if you have, for example an early car than a later car but still only a few more incorrect parts.

Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge