1968 Tiltaway Mounting

[Rcbach302]

Does anyone have a photo or a diagram showing how the vacuum actuator/bracket/solenoid attach to the underside of the dash? The assembly manual shows the single-bolt mounting tab attaching to "something", just not sure what that is.

Thanks in advance.

[gsteele]

Not sure if this helps - https://www.peterfranza.com/wp-content/uploads/2010/11/V3.jpg

[Rcbach302]

Yes - this is much better than what I have been able to find. Thanks!

[TLea]

Single 5/16" washerless bolt, typically no head marking clear zinc, serrated wizz nut on back side. Make sure good and snug, it grounds through there

[Royce Peterson]

Tim's explanation is correct. The hole is existing and present on cars that do not have tilt away. Like Tim says - make sure the surfaces are clean and free from paint because it needs to make an electrical ground there.

[Rcbach302]

Got it. Thank you all.