Piece of firewall pad needed 1966

[Shawn]

Hi - does anyone have a small section roughly 18"x12" of original firewall pad?  Its the dimple style and I'm missing a section of my original pad.  I've come up with a way to seem a piece in if I can locate rather than use a repo.

If you have an old worn pad and could cut a section off I'd be interested.  PM if you do along with asking price.

Thanks

Shawn

[Shelby_r_b]

Hi Shawn,

Can you post a pictures of which section you're looking to replace?

Thanks,
Ruben

[6s1640]

Hi Shawn,

Can you post a pictures of which section you're looking to replace?

Thanks,
Ruben

Hi Ruben,

If you have a damaged donor pad, I'd like to see if I could also get a Kennedy size half dollar piece for the heater delete hole for the hose.  I would make a cutting die to then cut down to size.

Thank you

Cory

[DennyD]

Hey Rubin, I need a piece about three inches by two inches to fill in a hole. So..........if you have some please PM me too. Thanks, Denny

[J_Speegle]

If you have a damaged donor pad, I'd like to see if I could also get a Kennedy size half dollar piece for the heater delete hole for the hose.  I would make a cutting die to then cut down to size.

Just should mention that not all San Jose pads had round holes punched in them for the heater hoses and I do have a few pictures of heater delete cars with the heater hose holes still punched out from 65 San Jose examples.  Ones a 6 cylinder car so don't think it was mess with.

[Shawn]

Here is a picture of the firewall pad from my 66. 

[Shawn]

Still looking for a piece of original pad.  As you can see from the picture within the thread its a relatively small piece I'm missing.  It is the drivers side lower by the pedals.  If you have this section great or any piece that can be blended into the missing parts will also work.

Thanks

[Bossbill]

PM to Shawn and 6s1640.

[DennyD]

BIG thanks goes out to Bossbill for helping me, Shawn, and Cory in finding what we needed. It's members on this Forum that are willing to help other members out, like Bill, that make this a great place to belong. Denny