Removal of scoop 63290A76 located rear of Door

[RSOHC]

I would like to remove the lower side scoop to the rear of the door on a 1968 GT500.
I have found the two screws on the leading edge of the scoop that can be seen from the outside of the car.  Is there a fastener on the inside of the car that also needs to be loosened?  If so, how is the area accessed?

Thanks

Lauran

[Rickmustang]

Yes. Main stud is accessed from inside. The interior panel has to be removed, so you have to remove a bunch of interior trim panels. It's a pain to get to the one but.

[RSOHC]

Thanks

Lauran

[Coralsnake]

Maybe, many convertibles had a large tube nut -the stud was pushed into it.

I do suggest looking for a nut first before you pull

[68blk500c]

Again, if convertible, the quarter window presents some challenges.  Good luck; don't damage it.

[TLea]

 He didn't say when the car was built. Push nuts were not used on early cars. The tracks were cut open like they did them with a butter knife