News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

Hood part number

Started by Shelbypat, April 18, 2019, 12:38:35 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Shelbypat

April 18, 2019, 12:38:35 PM Last Edit: April 18, 2019, 01:45:30 PM by Shelbypat
Hi all. Any ideas how I could get back my hood part number ?
Previous  body man made a rough job and sand it out as it has been touch at front long time ago. Hood still has potential. Just a bit bowed as usuel.

Bob Gaines

#1
April 18, 2019, 02:47:57 PM
Quote from: Shelbypat on April 18, 2019, 12:38:35 PM
Hi all. Any ideas how I could get back my hood part number ?
Previous  body man made a rough job and sand it out as it has been touch at front long time ago. Hood still has potential. Just a bit bowed as usuel.
The short answer is to make a mold using a hood that still has the numbers . After you make the mold and produce a positive of the engineering number you then graft that into place. There are various ways to accomplish the end result.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

KerryBWhite

#2
April 18, 2019, 03:38:09 PM
Here you go.....

https://www.ebay.com/itm/NOS-Shelby-Fiberglass-Hood-1969-Lower-section/282991201398?hash=item41e3970c76:g:eUkAAOSw8FBbEacG

NOS Shelby Fiberglass Hood 1969 Lower section.  Assemblyline lower hood section , original smooth  AO Smith injected fiberglass lower half with raise S9MS  engineering # visible.

Shelbypat

#3
April 19, 2019, 09:59:11 PM
Tks for inputs. I've ordered silicone mold kit. I'll try it.


Patrick
Print
Go Up Pages1
User actions