News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

Interesting VIN issue on a Mustang

Started by 1109RWHP, November 13, 2019, 11:25:08 PM

Previous topic - Next topic

1109RWHP

Lots of odd things going on here. The buck tag looks legit until you turn it over. I have never seen that before.
https://www.youtube.com/watch?time_continue=2&v=qvpNJD-Yc54&feature=emb_logo

J_Speegle

For a 66 NJ buck tag it does not appear to be shaped like what was typically used so even before its turned over the shape and the extra holes it would raise questions. The blanks typically used this year and plant has a wavy top and bottom edge rather than a straight edge rectangle we see but turing it over we see why it doesn't

For later cars it was not unusual to find door tags (full size 66 and up size) used to make buck tags. In this case using a 65 door tag in 66 for one IMHO would be unusual but not be really surprising - especially from the NJ plant. Also not that the buck tag removed from the car lacks any of the punched through inspection markings though not all cars built there that year had buck tags with the punching.


The lack of VIN's on the car is a whole "nother subject.
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

Coralsnake

Not uncommon for any of the plants to use warranty tag blanks and recycle them as buck tags. I have multiple examples and even on Shelbys.
The original Influencer, check out www.thecoralsnake.com

gt350hr

  Nothing surprises me on a Metuchen built car. Everyone there must have been on crack. More mis stamps and non stamps than anywhere.
     
Celebrating 46 years of drag racing 6S477 and no end in sight.

JWH

In the comments section under the video, some are saying this car without VINs may well be a test mule. I am (highly) skeptical, but any thoughts on this possibility?

Coralsnake

#5
Not even a remote possibility

Ford could not release such a car.

I think we can agree the buck tag is probably not from the car.

I havent tried capturing it yet.

The original Influencer, check out www.thecoralsnake.com

J_Speegle

Agree no "test mule"

Only Mustang I've seen and even owned without the usual factory hidden VINs was a car that the plant apparently changed the order for (so changes the drivetrain type) mid stream during the bucking process. Still don't know why they just didn't continue building the car as specified in the first place.

Was interesting car but ended up crushing the car since it was going to be an up-hill ongoing stack of issues I didn't want to address. Worked good as a conversation piece for a decade of so

On the 66 it would have been nice to see what the paperwork had as a VIN or a picture of the door tag though he mentions the data didn't match (paint and interior) so likely off another car - possibly
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

557

Quote from: gt350hr on November 14, 2019, 01:13:55 PM
  Nothing surprises me on a Metuchen built car. Everyone there must have been on crack. More mis stamps and non stamps than anywhere.
   
.  Well as a historical footnote this WAS "pre-crack"... ;D

Cobrask8

Quote from: 557 on November 14, 2019, 11:10:35 PM
Quote from: gt350hr on November 14, 2019, 01:13:55 PM
  Nothing surprises me on a Metuchen built car. Everyone there must have been on crack. More mis stamps and non stamps than anywhere.
   
.  Well as a historical footnote this WAS "pre-crack"... ;D


I grew up near there, probably alot of drunken workers.

Coralsnake

#9
Most likely missing due to repairs, if they are missing?

You could buy full Ford side panels (both aprons and shock tower)
The original Influencer, check out www.thecoralsnake.com