News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Aluminium T-10 original- driver

Started by GT350Lad, February 22, 2018, 04:40:28 AM

Previous topic - Next topic

GT350Lad

Hi guys, chasing an original or rebuilt good condition 'driver' Alumium T-10, going to do some vintage racing and decided to make the switch over

PM me

Cheers
6S373
6S1276

Bob Gaines

Quote from: GT350Lad on February 22, 2018, 04:40:28 AM
Hi guys, chasing an original or rebuilt good condition 'driver' Alumium T-10, going to do some vintage racing and decided to make the switch over

PM me

Cheers
Are you taking out a toploader and putting in a Shelby T10? If that is your scenario then I would re think it IMO . The toploader properly prepared and not the T 10  is what the choice of the majority of vintage racers use.  A driver T 10 should be used in a "street " driver car IMO. Check out what Cobra Automotive uses in their vintage race cars. Others may think differently.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

CSX2259

You do not want to use an original T10M, it is much to fragile and hard to replace, parts (gears) are next to impossible to find. Most serious vintage racers are using the Tex's / G-Force South Derived T10 transmissions.

Bob Gaines

Quote from: CSX2259 on February 22, 2018, 12:26:37 PM
You do not want to use an original T10M, it is much to fragile and hard to replace, parts (gears) are next to impossible to find. Most serious vintage racers are using the Tex's / G-Force South Derived T10 transmissions.
The race Cobras maybe but the majority of vintage race GT350's still use the toploader. I believe based on previous posts that the OP is referring to a GT350 .
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

GT350Lad

No worries, thanks for input guys, so I am looking for a good close ratio top loader?

Cheers
6S373
6S1276

Bigfoot

I just would not want to beat on a T10.
RIP KIWI
RIP KIWI

Rickmustang

I'm running a David Key aluminum case top loader. Best of both options.

CSX2259

#7
Quote from: Bob Gaines on February 22, 2018, 01:24:12 PM
Quote from: CSX2259 on February 22, 2018, 12:26:37 PM
You do not want to use an original T10M, it is much to fragile and hard to replace, parts (gears) are next to impossible to find. Most serious vintage racers are using the Tex's / G-Force South Derived T10 transmissions.
The race Cobras maybe but the majority of vintage race GT350's still use the toploader. I believe based on previous posts that the OP is referring to a GT350 .

We raced a 1966 GT350 with the Tex's / G-Force transmission in it. The Tex's transmission is their own proprietary racing transmission not a built up original 1960s transmission.

http://www.texracing.com

GT350Lad

Quote from: Bigfoot on February 22, 2018, 05:12:07 PM
I just would not want to beat on a T10.

True, thanks for the guidance guys

Cheers
6S373
6S1276