News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

WTB: 4100 Hi-po carb choke bracket

Started by CharlesTurner, January 26, 2020, 01:42:10 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

CharlesTurner

January 26, 2020, 01:42:10 PM
Looking for an original hi-po carb choke bracket.  The swivel assy that the cable attaches to.  Needed for an original C4OF carb that is missing this piece.

I also need 2 vacuum port brass screw in plugs.
Charles Turner
MCA/SAAC Judge

gt350hr

#1
January 27, 2020, 10:54:28 AM
   Charles , I have the lever/cam but no brass plugs. I know where to send it.
  Randy
Celebrating 46 years of drag racing 6S477 and no end in sight.

Dan Case

#2
January 27, 2020, 11:31:12 AM Last Edit: January 27, 2020, 11:37:57 AM by Dan Case
Quote from: gt350hr on January 27, 2020, 10:54:28 AM
   Charles , I have the lever/cam but no brass plugs. I know where to send it.
  Randy

I recently reverse engineered the 1964 and later spark vacuum port plug after finding the reproduction was sale was very soft brass and the slot was not near as deep and any of the three originals in carburetors I have.

Drawings available if anybody wants to make some plugs.


Dan Case
1964 Cobra owner since 1983, Cobra crazy since I saw my first one in the mid 1960s in Huntsville, AL.
Print
Go Up Pages1
User actions