Fuel Line Fitting

[Greg]

Hello, any ideas on where I can find this fitting.  It is the carburetor inlet to fuel line connection.

Thank you.

[Bob Gaines]

Hello, any ideas on where I can find this fitting.  It is the carburetor inlet to fuel line connection.

Thank you.

My first thought would be Carls Ford Parts. Although not listed on his website it would be worth the time to call and check.

[Greg]

Thank you!

[kingchief]

If this is the fitting you require, Jim Cowles may have one.

Cheers,

Steve

[kingchief]

Forgot to say this fitting is for the 66 to be clear and not get in trouble!

Steve

[Rbwiii]

NPD sells them

https://www.npdlink.com/product/fitting-fuel-inlet-holley-concours-correct-adapter-brass/205620?backurl=search%2Fproducts%3Fsearch_terms%3DHolley%252Bfuel%252Bfilter%252Badapter%26top_parent%3D200001%26year%3D1966&year=1966

[Bob Gaines]

NPD sells them

https://www.npdlink.com/product/fitting-fuel-inlet-holley-concours-correct-adapter-brass/205620?backurl=search%2Fproducts%3Fsearch_terms%3DHolley%252Bfuel%252Bfilter%252Badapter%26top_parent%3D200001%26year%3D1966&year=1966

Yes correct for a 66 but not a 65 like what the OP has. 

[JD]

Yes correct for a 66 but not a 65 like what the OP has.  ;)

Bob look at reply #4, he's looking for the '66 version...

Forgot to say this fitting is for the 66 to be clear and not get in trouble! :)

Steve

[Bob Gaines]

Yes correct for a 66 but not a 65 like what the OP has. 

Bob look at reply #4, he's looking for the '66 version...

Forgot to say this fitting is for the 66 to be clear and not get in trouble!

Steve

JD, too quick on the draw this time. Not that I am above making mistakes but this is the 65 section and the OP is not Kingchief . The OP is Greg who has a 65.

[JD]

Oh - Drat, now I see, apologies

[NC TRACKRAT]

The fitting from fuel pump to carb is part of the line, an assembly.  Here's one source: http://www.cobranda.com/19shfulio.html

[Greg]

The fitting from fuel pump to carb is part of the line, an assembly.  Here's one source: http://www.cobranda.com/19shfulio.html

Thanks for the response.  I'm not looking for the line but the fitting that the line fitting screws into.  The line doesn't screw directly into the carb.

[Bob Gaines]

This may be it . NPD 2020 catalog ,pg 172 . 380726-SA is the item # .Picture of the fitting is on the right.

[Greg]

Thank you Bob, I will look at it.

[NC TRACKRAT]

Bob, that's the fuel line clip.  Greg is looking for the brass fitting that goes into the carb and receives the fitting on the end of the fuel line that I gave him.  It's a smaller version of the big one that goes on the '66 because the '66 receives the fuel filter, not just the fuel line fitting.  I haven't a clue as to the source of that adapter might be.