News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

4159 KR resto commences

Started by Jack4159, November 10, 2020, 10:05:25 AM

Previous topic - Next topic

Jack4159

Just a little update.Body guys have had the car 8 months now, expect to be finished by Christmas.The fibreglass needed a lot of work, some of the gelcoat was shot but all saved and back in good shape now.

deathsled

Congrats to you. Always a good feeling seeing them in stripped down condition and then going back together to create something beautiful.
"Low she sits on five spoke wheels
Small block eight so live she feels
There she's parked beside the curb
Engine revving to disturb
She's the princess from his past
Red paint gold stripes damned she's fast"

greekz

Coming along nicely.  Funny, it always takes longer than we think.
SFM 6S1134  '67 GT-350 #2339

Jack4159

Quote from: greekz on July 29, 2021, 10:28:29 AM
Coming along nicely.  Funny, it always takes longer than we think.

It sure does....It's almost going to come as a surprise that first day I take her out on the road I think.

tesgt350



Coralsnake

#36
A GT500 KR does not have a knee pad on the dash. It is a feature of earlier built cars in 1968.
The original Influencer, check out www.thecoralsnake.com

shelbymann1970

Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626


shelbymann1970

Quote from: Corey Bowcutt on July 30, 2021, 08:19:11 AM
Quote from: shelbymann1970 on July 30, 2021, 07:21:05 AM
Quote from: Jack4159 on July 29, 2021, 12:48:23 PM
Quote from: tesgt350 on July 29, 2021, 12:26:42 PM
No Knee Pad on the Dash?
Knee pad?
check out the pics and see the knee pad on the dash http://www.thecoralsnake.com/History23

That does not appear to be a KR?
it wouldn't be as it is an early car with a knee pad. later cars didn't get knee pads as mentioned by Pete.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

Jack4159

OK I'll admit it took me a while, but I eventually figured out what a knee pad is. Happy to have learned something today, thanks everyone for the input.

shelbymann1970

Quote from: Jack4159 on July 30, 2021, 09:53:03 AM
OK I'll admit it took me a while, but I eventually figured out what a knee pad is. Happy to have learned something today, thanks everyone for the input.
I think the pillar pads were eliminated sometime also. My 68 didn't have the knee but had the pillar pads.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

Jack4159

UPHOLSTERY-repair(if possible) or replace.
4159 will be back from the body shop in a few weeks, much has been done whilst waiting but I can't make a decision on the upholstery.
I've attached a few pics, what would you do? Repair(if it can be repaired) or replace..?
The car has undergone a nut and bolt resto and is predominantly original but is not a concours car.
Thanks in advance for any opinions and feedback.

J_Speegle

Quote from: Jack4159 on December 30, 2021, 03:55:03 AM
UPHOLSTERY-repair(if possible) or replace.
4159 will be back from the body shop in a few weeks, much has been done whilst waiting but I can't make a decision on the upholstery.
I've attached a few pics, what would you do? Repair(if it can be repaired) or replace..?.....

Understand the urge to keep the original material and do a repair - have done it on some of mine. Issue is often that it still does not look fresh and new and can stand out in an otherwise fully restored and redone car.  Also old material and seams are more likely to ripe or tear again when compared to fresh not upholstery.

And option may be to store the original and have another set of seats and frames redone for the finished car.

Just some thoughts
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

Jack4159

Quote from: J_Speegle on December 30, 2021, 05:01:03 AM
Quote from: Jack4159 on December 30, 2021, 03:55:03 AM
UPHOLSTERY-repair(if possible) or replace.
4159 will be back from the body shop in a few weeks, much has been done whilst waiting but I can't make a decision on the upholstery.
I've attached a few pics, what would you do? Repair(if it can be repaired) or replace..?.....

Understand the urge to keep the original material and do a repair - have done it on some of mine. Issue is often that it still does not look fresh and new and can stand out in an otherwise fully restored and redone car.  Also old material and seams are more likely to ripe or tear again when compared to fresh not upholstery.

And option may be to store the original and have another set of seats and frames redone for the finished car.

Just some thoughts
Thanks Jeff, helpful thoughts thank you, I think I will go with new and should probably order them now before I change my mind again.