News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

C6 neutral switch question

Started by Shelbypat, November 23, 2020, 08:43:52 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Shelbypat

November 23, 2020, 08:43:52 AM Last Edit: November 23, 2020, 09:29:03 AM by Shelbypat
How the neutral switch harness hold on his way up to the connecter? (Surely not with tyrap to the brake line.)
If my memory is not bad, there is a P clamp hold the harness at the upper bolt of switch. What kind of  clamp is it ? Like the one on valve cover ?
Is It avalible ?

TKS
Patrick

Royce Peterson

#1
November 23, 2020, 10:43:27 AM
The harness comes forward over the neutral switch and through the vinyl lined clamp attached to the forward bolt securing the switch to the transmission. Yes that clamp appears to be identical to the clamps used to secure the engine wiring harness on top of the driver side valve cover.

Quote from: Shelbypat on November 23, 2020, 08:43:52 AM
How the neutral switch harness hold on his way up to the connecter? (Surely not with tyrap to the brake line.)
If my memory is not bad, there is a P clamp hold the harness at the upper bolt of switch. What kind of  clamp is it ? Like the one on valve cover ?
Is It avalible ?

TKS
Patrick
1968 Cougar XR-7 GT-E 427 Side Oiler C6 3.50 Detroit Locker
1968 1/2 Cougar XR-7 428CJ Ram Air C6 3.91 Traction Lock

Shelbypat

#2
November 24, 2020, 05:18:42 PM Last Edit: November 24, 2020, 05:34:47 PM by Shelbypat
Thank you. And how about the wire for the light coming from the shifter. How does It  hold aside or Along the floor to the connector ?

Patrick
Print
Go Up Pages1
User actions