NOS EX aluminum block/crank from GT40 program

[2112]

https://www.hemmings.com/parts/item/14189.html?refer=news

Category: Engine

SubCategory: Blocks & Parts

Very Rare Vintage Aluminum Block and matching Ford Crankshaft

9.2 Deck, 312 main, bore is 3.91 with calipers.

Crank has 312 mains, but rods appear to have been cut for narrower rods than the crank was forged for, Stroke is approximatly 3.700. No pics on the crank right now as it is in storage.

Appears to be NOS unused condition

Block casting number XE-93532 ASK 5370

Mid to late 60' Ford Can-am / GT40 Program Block and crank

I do not accept paypal and pick-up or shipping arrangements will need to be negotiated prior to acceptance of any sale.

Thank you for looking

Part Number:

XE-93532

Applications:

1966 - 1970 Ford GT40

[shelbydoug]

What? No one bought this yet? Manifort is under house arrest and they took his phone away from him. Otherwise he would have grabbed this up for sure?

[gt350hr]

  Jay Cushman has them in iron and aluminum. I think Gus has one too. 9.200 deck height . This block ( in aluminum) has a horsepower limit around 550. Beyond that they split main webs.  BTW the crank is probably a casting. The original XE cranks were. The 3.7 stroke was used in Can Am engines , not GT40s.