News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Torq Thrust D Tire Clearance

Started by JTRRozon, February 15, 2021, 10:49:39 PM

Previous topic - Next topic

JTRRozon

I am planning on installing a new set of 15 X 7 Torq Thrust D rims with modern radials.  My 66 GT 350 has been lowered 1" in the front end. and the rear is stock height.  I'm checking to see what tire size other people have installed and had adequate clearance and no tire rub.

Thanks for the information.

Speed Six

Mine is also lowered, tires are 225/60x15 Avons on Torque Thrust. Fenders had some clearance work (rolling,smoothing of lips). No rubbing.
We had to put in some more camber just in case for having it registered here in Germany to be on the safe side (they test quite thoroughly).
Rears have plenty of room - will try 245s soon. 225s look almost lost...  :D


2112

Quote from: Speed Six on February 16, 2021, 01:44:52 AM
Mine is also lowered, tires are 225/60x15 Avons on Torque Thrust. Fenders had some clearance work (rolling,smoothing of lips). No rubbing.
We had to put in some more camber just in case for having it registered here in Germany to be on the safe side (they test quite thoroughly).
Rears have plenty of room - will try 245s soon. 225s look almost lost...  :D

Can't wait to see pics!! 8)

Speed Six

Yeah...that´s still on hold due to Corona lockdown. And there is salt on the road. But hopes are rising ! ;D

jamesfee

Blue is currently running Torq-Thrust D's; 15x7 w/ -6mm offset and 215/60R15 upfront; 15x8 w/ 0mm offset and 235/60R15 in the rear. BFG Radial T/A's all around
I have the front A arms lowered 1". The fender lips have been rolled and I have no rubbing issues. It took a bit of massaging to get to this but well worth the effort.

Jim
6S1801

mlplunkett

Think you could get away with wider tires in the front?
67 GT500 tribute under construction
65 R-model tribute under construction

Rickmustang

I'm running 225 to n from with Cragers and 1 inch drop.

shelbyluva

Quote from: jamesfee on February 16, 2021, 08:45:05 AM
Blue is currently running Torq-Thrust D's; 15x7 w/ -6mm offset and 215/60R15 upfront; 15x8 w/ 0mm offset and 235/60R15 in the rear. BFG Radial T/A's all around
I have the front A arms lowered 1". The fender lips have been rolled and I have no rubbing issues. It took a bit of massaging to get to this but well worth the effort.

Jim

Nice picture!  Does the staggered size setup lead to dartiness on straight roads or notably increased understeer?

jamesfee

QuoteNice picture!  Does the staggered size setup lead to dartiness on straight roads or notably increased understeer?

Thanks - the picture was taken running the Tail of the Dragon last June.
The staggered sizing doesn't seem to change the dartiness over the original mags & tires. I attribute that more to the Caster setting being closer to "straight up" at +2. It's a real workout driving slow <g>. I can't say I notice any increase in understeer.

Jim
6S1801