67 shelby rear end cap screws

[cbrown]

Are all rear end caps supposed to have 3  philips head screws in the lower portion attaching to 1/4 panel?   

chris

[Bob Gaines]

Are all rear end caps supposed to have 3  philips head screws in the lower portion attaching to 1/4 panel?   

chris

It depends on when the car was converted. Some early cars have less.

[cbrown]

So what about a january  built car?  656 


chris 

[George Schalk]

Hi Chris, if it helps any, my #772 car with a February completion has 1 phillips head screw per side and they are mounted toward the bottom of the cap right above the lower valance.  The later cars I have 1665, 2310, and 2585 all have 3 Phillips screws per side.

Maybe others will chime in with what their earlier cars may have.

George

[JD]

I'd go with one for a January SA completion car.

here's examples ...

[cbrown]

thank you all very much!!

chris

[557]

Only 1 on#557.