Recommendations for clutch system.

[SFcarbuff]

Hi, I am kooking for recommendations for a clutch, pressure plate and bearing for my 1966.  The car is used mainly on the street.  Thanks

[s2ms]

I've been using a Centerforce Dual Friction setup my 66 since 1995, don't think I'd ever use anything else.

[6s1802]

Centerforce

[SFcarbuff]

Thanks to all.  Center Force was unanimous by posting and personal messages.

[Jbarela]

Does the center force feel stock in regards to pedal pressure, aside from wishing our car was a hertz for an automatic, need a clutch that does not kill my hip and knee.

[jamesfee]

The Centerforce is a diaphragm type clutch disc with the added benefit of moveable weights on the "fingers" to assist with weight balance at higher RPM. The stock OEM was a 3 finger Long Type. The OEM clutch would load the pedal pressure as you added heavier duty clutch units and had a nasty habit of wearing out (or breaking) the pot-metal bushing under the dash - it only had a plastic, anti-friction liner. Initially we went to pillow-block bearings for the clutch shaft, but the Centerforce design made that less necessary and is a lot easier to drive with.

jim