News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Intro and a GT 350 goes to Alabama

Started by JBinAlabama, July 12, 2021, 10:47:16 PM

Previous topic - Next topic

JBinAlabama

 So have drooled over Shelby cars since I was 15.....I'm guessing that is a very common theme here in this group.
About 12 years ago I purchased a kit cobra since a real one was just out of reach. It has been a blast.
I took my son to a ford car show several years ago and asked him to show me his favorite car. He picked a 66 GT 350. it had original paint that was a little crackled and the seats were very tired and torn.......it was a BEAUTY!!!
He was about 14 at the time and suggested we trade the cobra in on the white with blue stripes fastback. I let him know that we needed about five more kit cobras to trade to be in the price range of what he liked. He is 19 now and it's still funny.
I found an ad sometime back and spoke with the  owner (he bought it in 1969 or 70, you can reference your guide). I contacted Howard Pardee to confirm that it was a legit car.
So, my son and I made the approximately 1,200 mile trip last week to get the car.
We left early Tuesday from Gulf Shores, Alabama and drove to friends who live in Springfield, VA.
We slept a few hours and drove up to northern PA Wednesday at 4:30am. Traffic and country roads turned it into about noon arrival time.
We met the husband and wife who have owned the car for over 50 years! Amazing really.
It's was an original Hertz car and about 40 years ago, he modified it to look like a 65MR model. Including a repaint of white with guardsman blue stripes.
The original engine took a break long ago and he replaced it. I have many spares including a hipo 289 from a gt convertible. I also have the radiator and both the original front and rear glass.
I'm not sure what we will do next with the car but I do want to accumulate all the correct pieces.
I may have a lead on the original auto transmission, but I still need the following.
Magnum 500 wheels
Autolite carb
Distributor
Cobra tach
Rear brake drum assemblies
T cobra oil pan
Steering wheel and center cap
Single reservoir master cylinder
Carpeting
Seat belts
Heater box
Valve covers
If you have any of these original items socked away and are willing to part with them, let me know.
I'm not sure we will begin changing anything right away except the engine.
It's really too much for the street and runs on 110 race fuel.
I'm not sure of the horsepower but it makes my 425hp cobra feel like a Prius in comparison.
So for all you veteran shelby owners, expect a lot of questions!

66S285

66S285

JBinAlabama

Thanks, the dog is a beagle! Oh and I forgot, the car is S1300

silverton_ford

Congratulations!  Sounds like a great car. 

Great way to spend time with your son too.  Very nice!

J_Speegle

Congratulations


As far as the wish/Need list. Read, read, read the related threads for each piece on your list so you'll know what your looking for and what your not.  Be informed and educated so that you can review, ask good questions of the sellers and not have to rely on others . You made need to do that later for other details and help

DON"T think that just because you pay allot of money for a particular part its the right one or even a real one. Plenty of fakes of some of the things on your list.

After all of that get to posting a wanted list on this site and others. Happy hunting !!

Again congratulations for fulfilling a dream and hope 6S1300 makes you happy.
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

JD

'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

gjz30075

Thanks for the story.  Congratulations!
Greg Z
6S2249

deathsled

Congratulations on your acquisition! It brings back memories of driving with my own father to California at breakneck speed to get car 843...
"Low she sits on five spoke wheels
Small block eight so live she feels
There she's parked beside the curb
Engine revving to disturb
She's the princess from his past
Red paint gold stripes damned she's fast"


NC TRACKRAT

Welcome!  You've come to the right place.  My only advice in addition to what's been given above is to take your time and research before committing time and money to something you may have to re-do if done incorrectly.  I was told many years ago that, if I didn't do my homework, I'd spend many thousands of dollars correcting my mistakes.
5S071, 6S1467

gt350hr

   You might want to post the serial number . Valve covers , tachs , and some other things changed from early to late.
      Randy
Celebrating 46 years of drag racing 6S477 and no end in sight.

KR500

Quote from: gt350hr on July 13, 2021, 12:22:27 PM
   You might want to post the serial number . Valve covers , tachs , and some other things changed from early to late.
      Randy
See reply #2
Rodney Harrold,Ohio SAAC Rep,SAAC 68 Shelby Concourse Judge,68 GT500KR 02267

gt350hr

   Sorry , thank you. So black , closed letter valve covers , "bottom logo" tach , Impact ( possibly) seat belts , Autolite "blue" shocks.
Celebrating 46 years of drag racing 6S477 and no end in sight.

TJinSA

Saw an original tach for sale by Jim Wicks at the Mid America Meet, Lower Cobra Logo as your car would have had
Tom Kubler
6S296

Bill

Great story, my sound advice, is to separate your "parts wanted" ad and place it in the proper classifieds subforum for such items.


Bill
Instead of being part of the problem, be part of a successful solution.
HOW TO IDENTIFY A FORUM TROLL
https://www.saacforum.com/index.php?topic=16401.0