News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

1965 Block off plate

Started by 427heaven, November 02, 2021, 04:20:41 PM

Previous topic - Next topic

427heaven

Approximate value of Original 1965 block off plate... Did any cars use them?

Bob Gaines

Quote from: 427heaven on November 02, 2021, 04:20:41 PM
Approximate value of Original 1965 block off plate... Did any cars use them?
You may want to define which one . For example there are radio, heater control, heater motor even cigarette lighter. There are a few.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Jbarela

Quote from: Bob Gaines on November 02, 2021, 06:34:48 PM
Quote from: 427heaven on November 02, 2021, 04:20:41 PM
Approximate value of Original 1965 block off plate... Did any cars use them?
You may want to define which one . For example there are radio, heater control, heater motor even cigarette lighter. There are a few.

Hi bob, hope all is well. Do you any chance have pics or part numbers of that cigarette lighter delete?

6s1640

Hi Jimmy, here you go with a couple pictures of the cigarette delete. I do not know the part numbers.

Enjoy

Cory

6s1802

As far as anybody can tell all 65-66 street cars came with heaters and lighters. If I'm wrong somebody please let me know. I run a heater delete because it keeps that annoying heater from eventually leaking on the floor and taking it out. Also like the clean engine compartment. The lighter delete plug is correct, I have one on my '65 coupe.

Bob Gaines

Quote from: 6s1802 on November 03, 2021, 09:41:52 PM
As far as anybody can tell all 65-66 street cars came with heaters and lighters. If I'm wrong somebody please let me know. I run a heater delete because it keeps that annoying heater from eventually leaking on the floor and taking it out. Also like the clean engine compartment. The lighter delete plug is correct, I have one on my '65 coupe.
The allure of the delete items is typically for the 65 GT350 R model and tribute crowd.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

6s1640

Quote from: 6s1802 on November 03, 2021, 09:41:52 PM
As far as anybody can tell all 65-66 street cars came with heaters and lighters. If I'm wrong somebody please let me know. I run a heater delete because it keeps that annoying heater from eventually leaking on the floor and taking it out. Also like the clean engine compartment. The lighter delete plug is correct, I have one on my '65 coupe.

Do you have the heater defrost duct vent delete plates?

Cory

427heaven

I always thought the radio delete was the only thing that was deleted, so to clarify - The radio block off plate is what I am asking about.

6s1640

#8
This 1966 is being offered BIN for $279.99 and the 65 for $225.  Currently a "No sale" on both, too high.  The 1966 version will work on a 1965 Mustang.  The 1965 version will not work on a 1966 Mustang, because of the inside round corners on the dash and pointy corners on the delete plate.

Ebay Auctions No. 234024628128 (66) and 154570764737 (65)

Cory

Harris Speedster

#9
Cory,
The 63 and the Fai lead me to believe that this may have had other prior light weight duties ?
Possibly an early Fai Thunderbolt or ?
just saying>>
John
Is this the first futuristic exotic in the world?
Size of an ac cobra, but built in 1935 !
https://www.autopuzzles.com/forum/features-stories-and-photos/harris-fwd-speedster-the-story/?PHPSESSID=v4pqtv6hep4ff4rvalrc9qsnj7


Jbarela

Quote from: 6s1640 on November 03, 2021, 11:10:07 PM
Quote from: 6s1802 on November 03, 2021, 09:41:52 PM
As far as anybody can tell all 65-66 street cars came with heaters and lighters. If I'm wrong somebody please let me know. I run a heater delete because it keeps that annoying heater from eventually leaking on the floor and taking it out. Also like the clean engine compartment. The lighter delete plug is correct, I have one on my '65 coupe.

Do you have the heater defrost duct vent delete plates?

Cory
thanks for the pics!! Can you possibly make me a template for the duct deletes. Need those, wonder what would be the best matching material to cut them out of??