1966 GT 350, November build ,,,, looking for parking cable info

[bobboss351]

  Are there any paint identifiers on the cables it self ? the floor pan side  End of the cable Blue   The backing plate spring that snaps into the backing plate and the return spring that connects to the secondary brake shoe?
btw,, still have not resolved the glass issue yet,,,,,, lol, he can drive it with out .... LOL

[J_Speegle]

The outer jacket as mentioned typically had a blue or blue-gray paint coating (brushed all the way around) at the metal end that sat in the receiver that was welded to the sides of the driveline tunnel. The fixture with the fingers that snapped into and held the cable in the backing plate was typically yellow completely.

Of course make sure every other detail (non- paint mark related) is exact and correct before you worry about the paint daubs and markings since no amount of the marks will make up for an incorrect part to begin with

Hope this helps

[bobboss351]

 thank you Jeff,,
Yes, i cannot agree more, I appericate you taking the time to reply back. I understand what you are talking about , I cannot agree more with you sir.  this is a great car and the parts are correct, I just want to do the very best I can ,,,  , I always appericate your wealth of knowledge , the pictures are huge,, Bob Wilson,,,