News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

67400F2A01043 on BAT

Started by 5s386, July 29, 2022, 12:39:11 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

FL SAAC

#1
July 29, 2022, 02:18:46 PM
Nice ride !
When you arise in the morning, think of what a precious privilege it is to be alive to breathe, to think, to enjoy, to love. ~
Marcus Aurelius Antoninus Augustus

Home of the Amazing Hertz 3 + 1 Musketeers

I have all UNGOLD cars

Wedgeman

#3
January 20, 2023, 07:18:04 PM
Wow! I gotta watch this one go off with ...NO RESERVE !!.... ;D

Bob Gaines

#4
January 21, 2023, 12:04:49 PM
What is wrong with this picture? ;)
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Wedgeman

#5
January 21, 2023, 02:48:29 PM Last Edit: January 21, 2023, 03:27:53 PM by Wedgeman
  :-\ :-[ :( :'(   side stripe not going back further?

greekz

#6
January 21, 2023, 03:11:38 PM
I will take a guess, should be large letters on the tire.
SFM 6S1134  '67 GT-350 #2339

S412gofast

#7
January 21, 2023, 03:12:44 PM
Quote from: Bob Gaines on January 21, 2023, 12:04:49 PM
What is wrong with this picture? ;)

Bumper bracket to frame bolt should be PO, not silver zinc
1967 GT350 01341, FORD Build: 2/28/67 ; SAI Build 3/28/67
1966 GT 2+2, 4spd, PS, tinted windows, Raven Black w/Black Pony interior; FORD Build: 10/11/65
1986 SVO, Oxford White w/Leather interior
1987 Saleen #132 Dark Gray Metallic

JD

#8
January 21, 2023, 03:19:38 PM Last Edit: January 21, 2023, 03:21:26 PM by JD
Quote from: S412gofast on January 21, 2023, 03:12:44 PM
Quote from: Bob Gaines on January 21, 2023, 12:04:49 PM
What is wrong with this picture? ;)

Bumper bracket to frame bolt should be PO, not silver zinc
+1

Also, tire lettering, valve stem and center cap logo orientation  needs adjusted.  Model designation (side) stripe may not be correct position.

(small letter is correct for this VIN #)
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

S412gofast

#9
January 21, 2023, 03:29:34 PM
On interior pic of Shelby gauge pod the oil press is on the right.  I have always seen the oil pressure on the left side. 
1967 GT350 01341, FORD Build: 2/28/67 ; SAI Build 3/28/67
1966 GT 2+2, 4spd, PS, tinted windows, Raven Black w/Black Pony interior; FORD Build: 10/11/65
1986 SVO, Oxford White w/Leather interior
1987 Saleen #132 Dark Gray Metallic

SCJSTU

#10
January 21, 2023, 04:30:41 PM
Quote from: Bob Gaines on January 21, 2023, 12:04:49 PM
What is wrong with this picture? ;)

Wrong center cap?
1969 Shelby GT350 convertible 4 speed/ AC
Built Jan 1969 Red/Black

1967 S-Code 4 spd Black/Parchment
2004 Mustang Mach 1
1956 Ford F-100 Big Window 392 Hemi
1957 F-100 Fridge
1963 Falcon Ranchero
1961 Econoline PU
1961 Falcon 2 dr wagon
1970 Challenger R/T vert 4 speed
1970 Chevy Blazer 2WD

Bob Gaines

#11
January 21, 2023, 04:34:24 PM
Quote from: S412gofast on January 21, 2023, 03:12:44 PM
Quote from: Bob Gaines on January 21, 2023, 12:04:49 PM
What is wrong with this picture? ;)

Bumper bracket to frame bolt should be PO, not silver zinc
Bingo. The factory didn't put shiny things under there because they would visually stick out like that one does..
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

5s386

#12
January 30, 2023, 06:28:12 PM
Hammered for $315,000. at BJA. Plus buyer fee.
Print
Go Up Pages1
User actions