News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

1967 Nightmist Blue GT500 4-speed on Bringatrailer

Started by Jdlebeis, July 29, 2022, 06:06:42 PM

Previous topic - Next topic

Royce Peterson

Wow the peanut gallery folks have some really dumb stuff to say........!
1968 Cougar XR-7 GT-E 427 Side Oiler C6 3.50 Detroit Locker
1968 1/2 Cougar XR-7 428CJ Ram Air C6 3.91 Traction Lock

DennyD


67 GT350

Quote from: Royce Peterson on July 31, 2022, 12:39:43 PM
Wow the peanut gallery folks have some really dumb stuff to say........!

Thank you! You must be referring to the others as I was only one person...LOL
RARE  Signature Delete

67 GT350

RARE  Signature Delete

oldcanuck

#19
I agree.... that BaT blue '67 is sitting too high.... and higher than stock..... especially the front end.

I'm guessing fresh repro springs.
Bob
Knoxvegas, TN

Royce Peterson

Quote from: 6S1568 on July 31, 2022, 01:21:33 PM
Yep, like "correct number of pedals"

Actually I was referring to the knucklehead who posted that Magnum 500 wheels were an option........
1968 Cougar XR-7 GT-E 427 Side Oiler C6 3.50 Detroit Locker
1968 1/2 Cougar XR-7 428CJ Ram Air C6 3.91 Traction Lock

Coralsnake

It does have a way of exposing a lot of people. I guess its got that going for it  ;D
The original Influencer, check out www.thecoralsnake.com

mikeh

Don't get me wrong, I don't like the look of the front end higher than the rear either, but isn't that "correct" for a lot of cars? Including 67 Shelbys? Just curious as I am not sure.

Coralsnake

The cars were originally set up to be lower in the rear
The original Influencer, check out www.thecoralsnake.com

Coralsnake

$200,000 plus and the question is about a $3 decal. Can anyone explain the logic there?
The original Influencer, check out www.thecoralsnake.com

SCJSTU

someone school me on engine detailing on a 67 big block.....is the blue overspray at front of engine on the intake correct?
1969 Shelby GT350 convertible 4 speed/ AC
Built Jan 1969 Red/Black

1967 S-Code 4 spd Black/Parchment
2004 Mustang Mach 1
1956 Ford F-100 Big Window 392 Hemi
1957 F-100 Fridge
1963 Falcon Ranchero
1961 Econoline PU
1961 Falcon 2 dr wagon
1970 Challenger R/T vert 4 speed
1970 Chevy Blazer 2WD


George Schalk

#27
Quote from: SCJSTU on August 01, 2022, 02:35:38 PM
someone school me on engine detailing on a 67 big block.....is the blue overspray at front of engine on the intake correct?
Yes, the overspray on the leading front edge of the intake is correct on a '67 GT500 428 engine.  Ford painted the assembled 428 engines with the aluminum intake already installed and used a mask to cover the intake so it wouldn't get painted.  The mask covered the intake, but not completely, causing overspray on the edge of intake 

For the small block cars, Ford shipped the GT350 cars to SA with a std 289 HiPo assembly with the painted cast iron intake, which the aluminum intakes and carbs were later swapped out at SA.

Royce Peterson

Quote from: Coralsnake on August 01, 2022, 08:48:41 AM
It does have a way of exposing a lot of people. I guess its got that going for it  ;D

LOL I like what you said here Pete.
1968 Cougar XR-7 GT-E 427 Side Oiler C6 3.50 Detroit Locker
1968 1/2 Cougar XR-7 428CJ Ram Air C6 3.91 Traction Lock

Jdlebeis

Tomorrow is going to be fun. Bid is already at 250k.