News:

SPECIAL NOTICE - See SAAC-50 Forum for DATE CHANGE for SAAC-50

Main Menu

'69 Trunk Q

Started by Survivor, August 26, 2022, 09:20:59 AM

Previous topic - Next topic

Survivor

Did the '69 spare have a plain jane rim or a five spoke and what would the tire have been.  I'm assuming it came with the air cannister.  Thx.

Coralsnake

#1
You need Coralsnake help 😎

www.thecoralsnake.com/69tires

See the bottom of the page
The original Influencer, check out www.thecoralsnake.com

Bob Gaines

Quote from: Survivor on August 26, 2022, 09:20:59 AM
Did the '69 spare have a plain jane rim or a five spoke and what would the tire have been.  I'm assuming it came with the air cannister.  Thx.
Since the excellent information in the  www.thecoralsnake.com/69tires  website did not completely answer your question I will give confirmation that spacesaver installed was a plain steel rim . I hope Pete will add the addition of this tidbit as I have been asked many times about the same question given illustrations on some jacking instruction stickers. Also earlier pre late March cars did not typically come with a bottle cradle and later cars did. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Coralsnake

I would be happy to add that information to the page.

Would I be correct in saying it is the 14x6 disc brake steel wheel?
The original Influencer, check out www.thecoralsnake.com

Bob Gaines

Quote from: Coralsnake on August 26, 2022, 11:27:56 AM
I would be happy to add that information to the page.

Would I be correct in saying it is the 14x6 disc brake steel wheel?
Most likely but I am not for sure that if in 69 the standard 14" steel wheel is different between disc and drum. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

shelbymann1970

I can take a picture of my original one in my GT350 if you like. I know it isn't a dist pic but it's the best I can do at home.  ;D
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

honker

Here's what I have noted as a '69 ?  GT350 trunk in my files, not sure if this is original or restored ? I believe these images where

on forum 1 ? ?

Mike

Bob Gaines

FYI the yellow sticker in not concours correct if that matters. That is because they were not available at the time of the MFG or even a couple years after. They were sent to Shelby owners as part of a recall starting in around 1971. I have a letter from Ford including the sticker asking to immediately apply to wheel. Dealers were probably asked to apply them as well just like the caution fan stickers. It is only a small minority of 7.35 space savers that I ever see for sale have them applied. I have not seen a survivor car yet that has had one applied not to say a survivor owner could not have received the letter and applied the enclosed sticker but that out the many survivors that I have seen none have had the sticker applied. I have however seen a couple where the sticker was loose . Apparently a sticker was received and rather then apply it the owner tossed it in with the space saver.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

shelbymann1970

Quote from: Bob Gaines on August 26, 2022, 03:27:01 PM
FYI the yellow sticker in not concours correct if that matters. That is because they were not available at the time of the MFG or even a couple years after. They were sent to Shelby owners as part of a recall starting in around 1971. I have a letter from Ford including the sticker asking to immediately apply to wheel. Dealers were probably asked to apply them as well just like the caution fan stickers. It is only a small minority of 7.35 space savers that I ever see for sale have them applied. I have not seen a survivor car yet that has had one applied not to say a survivor owner could not have received the letter and applied the enclosed sticker but that out the many survivors that I have seen none have had the sticker applied. I have however seen a couple where the sticker was loose . Apparently a sticker was received and rather then apply it the owner tossed it in with the space saver.
Valve stem is also incorrect. I see them on later space savers.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

honker

Thanks guys ! as always a reply detailed and informative.

Mike

Bob Gaines

Quote from: shelbymann1970 on August 26, 2022, 03:30:30 PM
Quote from: Bob Gaines on August 26, 2022, 03:27:01 PM
FYI the yellow sticker in not concours correct if that matters. That is because they were not available at the time of the MFG or even a couple years after. They were sent to Shelby owners as part of a recall starting in around 1971. I have a letter from Ford including the sticker asking to immediately apply to wheel. Dealers were probably asked to apply them as well just like the caution fan stickers. It is only a small minority of 7.35 space savers that I ever see for sale have them applied. I have not seen a survivor car yet that has had one applied not to say a survivor owner could not have received the letter and applied the enclosed sticker but that out the many survivors that I have seen none have had the sticker applied. I have however seen a couple where the sticker was loose . Apparently a sticker was received and rather then apply it the owner tossed it in with the space saver.
Valve stem is also incorrect. I see them on later space savers.
Good eyes Gary. I missed what I call the double valve stem . Those later 70's space saver's are the ones that the stickers were applied to at the factory . I cant tell in the picture the size but the majority of those with the double valve stem had a F 78 14 sized tire too.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

shelbymann1970

Quote from: Bob Gaines on August 26, 2022, 03:53:18 PM
Quote from: shelbymann1970 on August 26, 2022, 03:30:30 PM
Quote from: Bob Gaines on August 26, 2022, 03:27:01 PM
FYI the yellow sticker in not concours correct if that matters. That is because they were not available at the time of the MFG or even a couple years after. They were sent to Shelby owners as part of a recall starting in around 1971. I have a letter from Ford including the sticker asking to immediately apply to wheel. Dealers were probably asked to apply them as well just like the caution fan stickers. It is only a small minority of 7.35 space savers that I ever see for sale have them applied. I have not seen a survivor car yet that has had one applied not to say a survivor owner could not have received the letter and applied the enclosed sticker but that out the many survivors that I have seen none have had the sticker applied. I have however seen a couple where the sticker was loose . Apparently a sticker was received and rather then apply it the owner tossed it in with the space saver.
Valve stem is also incorrect. I see them on later space savers.
Good eyes Gary. I missed what I call the double valve stem . Those later 70's space saver's are the ones that the stickers were applied to at the factory . I cant tell in the picture the size but the majority of those with the double valve stem had a F 78 14 sized tire too.
easy to miss as the sticker blinds you.  :D
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

shelbymann1970

original parts. I added the sticker over 20 years ago(no witness of having the sticker before).
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626

Survivor

Could someone enlighten me as to the '69 date code 9ME w/ respect to an original BF spare tire.  Thx.

shelbymann1970

Quote from: Survivor on September 01, 2022, 10:16:30 AM
Could someone enlighten me as to the '69 date code 9ME w/ respect to an original BF spare tire.  Thx.
I have original wheels-69 Mach1 chrome wheels where I see the same thing stamped. I'm sure that 9ME isn't a date code per year/month/week so to speak. That spare is the original to a May 6th 1969 Dearborn car. I can pull the wheel out for further inspection.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)
"2nd" owner of 68 GT500 #1626