1967 Shelby End Caps Fasteners

[nightmist67]

Need a full set of correct RBW fasteners to install a pair or original 1967 Shelby fiberglass fender extensions (end caps).

[greekz]

You might check the AMK catalog if you cannot find some originals.  His bolts are really close to originals.

[nightmist67]

Are you referring to the AMK Products Part No. B-11540 (5/16 x 18 x 15/16 HX .88 CONI SEMS LP "RBW" Cadmium/Wax Finish)?

[JD]

Link, scroll down on link...
https://www.amkproducts.com/i-kits/ford-individual-fastener-kits/?year_=1967&model=Mustang&category=Body

See attached...the F-3292 Kit and parts

Hope this helps

[Bob Gaines]

Link, scroll down on link...
https://www.amkproducts.com/i-kits/ford-individual-fastener-kits/?year_=1967&model=Mustang&category=Body

See attached...the F-3292 Kit and parts

Hope this helps

That is the correct bolt and finish however technically RBW was the typical makers mark on the bolt head and not SEMS. A small detail for those who want to be most correct.