1965 Shelby GT350 Steering Wheels

[Shelby_r_b]

I have two 1965 GT350 Steering Wheels for sale.

First up: an exact replica of the 3-hole 1965 GT350 Steering Wheel. These are produced by Springall out of the UK. These wheels were replicated to exact specifications using an original 1965 3-hole wheel. These wheels are absolutely stunning! This one has never been mounted / driven, and it comes with the optional (from Springall) hub. 

Price is SOLD plus the ride.

[Shelby_r_b]

The second steering wheel is a reproduction originally sold through Tony Branda. This one was originally produced in the 80s, and I purchased it as an NOS repro. The wheel has been mounted, and it comes with the mounting hub. One neat point about the hub: it's been modified to cancel turn signals (see the red arrow in picture 3).

Price is $475 plus the ride.

Thanks!

[TLea]

I wish first wheel was second wheel style 

[OldMil]

PM sent, Thanks!  Jack

[67 GT350]

Can you tell me if these would work on a 66? if so, is there a horn modify that cam be done?

[Shelby_r_b]

Can you tell me if these would work on a 66? if so, is there a horn modify that cam be done?

Great question! These can definitely be used on a 66. However, I'm not aware of a way to use a horn button that's mounted in the center of the wheel (others may be able to correct me).

What I have seen people do on a 66 is run a horn switch to the dash (just like in a 1965 GT350). In fact, a good friend of mine has a Carryover and uses a 1965 GT350 steering wheel and he mounted a horn switch just like on 65 GT350s.

I hope that helps!

[Shelby_r_b]

In fact, the one wheel from Branda that was mounted / used was mounted to a 66 Mustang. I used a horn switch that was mounted on the dash, as the car was built as an R Model Restomod.

[67 GT350]

Are there any centers for the wheels? Or what would you order?

[Shelby_r_b]

Are there any centers for the wheels? Or what would you order?

I would use a repro center cap (or you can run without one).

Here's the one from Branda, but they haven't had them in stock for a while.

https://store.cobranda.com/cstwhcecap.html

[Shelby_r_b]

The 3-hole steering wheel is sold!

The Branda repro is still available.

Thanks!

[Shelby_r_b]

I wish first wheel was second wheel style 

Hey Tim,

That same shop is now producing the slotted 65 wheels. PM me if you want the contact info for the owner, Mark.

Thanks!

[Shelby_r_b]

Bump - the reproduction wheel is still available - thanks!