News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Axle bumper brackets

Started by TLea, June 21, 2023, 07:12:11 PM

Previous topic - Next topic

TLea

Because of someone's desire for wide tires way back, I need a pair of the rear axle bumper brackets that mount to the frame rail on each side. I realize this is a pain in the ass part that will probably have to be cut out of a frame, but more than willing to pay the time for somebody to do it. I need them intact with the spot welds. Pretty sure any first generation mustang is the same. Some pitting OK but no rotted through pieces please. Email direct TimothyLea7@gmail.com

TLea

Should've checked eBay first, guy had a pair already to go. Thanks.

WT6066-2600

Tim, just remembered that there are a set of rear frames in my rust "garden."

If still interested, let me know.

Mmmm, now which neighbor borrowed my Sawzall? Joe

JD

'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

WT6066-2600

Thanks for the fix, didn't know how to do that

JD

#5
"Paint" is a very basic Image editing program that is supplied on many computers.

Do a search for it on your system (if using a laptop or tower) not sure about cell phones.

Open Paint and then while in Paint open the image you want to modify and select the "rotate" option tool and select the direction you want to rotate the image and then save or rename and save, then post or repost it.

See attached...

Hope this helps...
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

WT6066-2600

Got it, never too old to learn, Joe