1968 Convertible - Detailing The Trunk

[8T03S1425]

I'm looking for some good ole fashion help with detailing my trunk.

8T03S-01425 was built on 02/14/1968, it's a white car with black interior and top. It also has the early style recessed side reflectors.

I need the correct:

• trunk floor mat
• luggage protector strip
• side reflector screw caps (Are they used in my car?)
• location information for the trunk stickers and decals

Pictures would be a tremendous help.

Thanks,

Steve

[Chris Thauberger]

Here are a few from my car. If you would like more let me know.

Chris

[Coralsnake]

Looks pretty awesome to me

[Shelby_r_b]

Great pictures - thanks, Chris!!

[J_Speegle]

Some additional pictures from unrestored cars


Decals

8T1803xx


8T03J1924xx




Mats and details close by

8T03S1494xx


8T1803xx


8T03J1924xx



Hope this helps

[papa scoops]

my car has a ford replacement mat in it, like the speckeled ones (circa 74) was listed as burtex, my original looks more like the one with rust stains. the taillamp covers look to light, may just be the flash. phred

[8T03S1425]

Some additional pictures from unrestored cars


Decals

8T1803xx


8T03J1924xx




Mats and details close by

8T03S1494xx


8T1803xx


8T03J1924xx



Hope this helps

You betchem Red Rider.

[gt350shelb]

I will look for some luggage protector caps

[Corey Bowcutt]

gt350shelb,

If you are talking about the side reflector screw caps and you find more that 4 for Steve I could use 4 of those myself.

Corey

[J_Speegle]

gt350shelb,

If you are talking about the side reflector screw caps and you find more that 4 for Steve I could use 4 of those myself.

Corey

Believe those are being reproduced but sold under a different description

[Corey Bowcutt]

If anyone knows who is reproducing them and/or what the description is please let me know.

[In The Doghouse]

https://www.npdlink.com/store/products/screw_protector_kit_taillight_marker_light-101707-1.html

[Corey Bowcutt]

Thank you Nooboob!

[CharlesTurner]

Regarding the trunk mat installation on a convertible... I have seen original cars with the mat underneath the divider board, the flat screws going through the board, then the mat and into the body.

That red convertible in the pics above had some work done to it, so I would use the pics with caution.  I always thought it was a nice Unrestored example until studying all the pics closely.

[Chris Thauberger]

Charles

Do you have any picture that show what you describe above with the screw?

Thanks

Chris